Valid

GB/T 36365-2018Information technology—Radio frequency identification—General specifications for passive tag at 800/900MHz (English PDF)

信息技术射频识别 800/900MHz无源标签通用规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36365-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 7, 2018

Implementation date

January 1, 2019

Scope

GB/T 36365-2018 is the English-translated version of 信息技术射频识别 800/900MHz无源标签通用规范.

GB/T 36365-2018 sets the general requirements for passive radio frequency identification tags working in the 840 MHz to 845 MHz and/or 920 MHz to 925 MHz bands.

It covers tag composition, size, appearance, function, performance, environmental adaptability, bending stress and antistatic behaviour, with the test conditions and test methods for each item.

It also gives the quality assessment procedure, with type, batch and periodic inspection, and the rules for marking, packing, transport and storage. The standard builds on the air interface protocol of GB/T 29768-2013 and the conformance test method of GB/T 35102-2017, and uses identification, read and write field strength thresholds.

It applies to the design, production, inspection and acceptance of such tags, was issued on 7 June 2018 and has applied since 1 January 2019.

Found what you need?

Document preview — GB/T 36365-2018

National Standard of the People's Republic of China

ICS: 35.240.15
Classification: L 70

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Symbol
5 Abbreviations
6 Request
6.1 Composition
6.2 Size
6.3 Appearance
6.4 Function
6.5 Performance
6.6 Environmental Adaptability
6.7 Bending Stress
6.8 Antistatic
7 Test method
7.1 Test conditions
7.2 Default Tolerance
7.3 Composition
7.4 Size
7.5 Appearance
7.6 Function
7.7 Performance
7.8 Environmental Adaptability
7.9 Bending Stress
7.10 Antistatic
8 Quality Assessment Procedure
8.1 General Provisions
8.2 Inspection Category
8.3 Stereotype inspection
8.4 batch inspection
8.5 Periodic Inspection
9 Signs, Packaging, Transport and Storage
9.1 Logo
9.2 Packing
9.3 Transportation
9.4 Storage

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the 840MHz~845MHz and/or 920MHz~925MHz passive RF tags (hereinafter referred to as tags).

General requirements, describes the corresponding test methods, gives quality assessment procedures, and signs, packaging, transportation and storage.

This standard is applicable to the design and development of passive radio frequency tags operating at 840MHz~845MHz and/or 920MHz~925MHz. Production, inspection and acceptance.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.

GB/T 191-2008 packaging, storage and transportation logo

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature

GB/T 2423.3-2016 Environmental testing for electric and electronic products Part 2. Test methods Test Cab. Constant damp heat test

GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Ka. Salt spray

GB/T 2423.24-2013 Environmental test Part 2. Test method test Sa. Simulate solar radiation on the ground and its test Guideline

GB/T 2828.1-2012 Count sampling inspection procedures Part 1. Batch inspection sampling based on AQL plan

GB/T 17626.2-2006 Electromagnetic compatibility test and measurement techniques Electrostatic discharge immunity test

GB/T 28177.3-2012 Identification card flexible thin card - Part 3. Test method

GB/T 29261.3-2012 Information technology - Automatic identification and data acquisition technology - Vocabulary - Part 3. Radio frequency identification

GB/T 29768-2013 Information Technology Radio Frequency Identification 800/900MHz Air Interface Protocol

GB/T 35102-2017 Information technology radio frequency identification 800/900MHz air interface compliance test method

3 Terms and Definitions

The terms and definitions defined in GB/T 29261.3-2012 apply to this document.

4 Symbols

The following symbols apply to this document. ETHR-ID. Identify the field strength threshold. ETHR-R. Read field strength threshold. ETHR-W. Write field strength threshold. Emax. Maximum work field strength.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Cited by

Similar standards

GB/T 47347-2026|GB/T 33767.9-2025|GB/T 45228-2025|GB/T 45498.1-2025|GB/T 45498.2-2025|GB/T 45498.3-2025

How to Download GB/T 36365-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.