Valid

GB/T 35765-2017Specifications for national land boundary surveying and mapping (English PDF)

陆地国界测绘规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (35 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35765-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35765-2017 is the English-translated version of 陆地国界测绘规范.

GB/T 35765-2017 is the Chinese standard "Specifications for national land boundary surveying and mapping". Its scope clause reads: This standard stipulates general principles, preparatory preparations, mapping of boundary topographic maps, joint surveys and inspections, and quality control of terrestrial borders.

Face request. This standard is applicable to boundary surveying and mapping work in demarcation, demarcation and joint inspection of land borders. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 35765-2017

National Standard of the People's Republic of China

ICS
07.040
Classification
A 75

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 General
  • 4.1 Mapping Content
  • 4.2 Operational Principle
  • 4.3 Coordinate System, Elevation System and Time System
  • 4.4 Scale
  • 4.5 Fragments and Numbers
  • 4.6 Geographical Survey Range
  • 4.7 Accuracy requirement
  • 4.8 Terrain Category and Basic Contour
  • 4.9 Height of the annotation annotation point
  • 4.10 Symbol
  • 4.11 Other requirements
  • 5 Preparation
  • 5.1 Fieldwork
  • 5.2 Data Collection
  • 5.3 Technical Design
  • 5.4 Implementation Plan Formulation
  • 5.5 Personnel Business Training
  • 5.6 Equipment Preparation
  • 6 Border Topographic Mapping
  • 6.1 Basic Requirements
  • 6.2 Joint Aviation Photography
  • 6.2.1 General requirements
  • 6.2.2 Photo Quality Requirements
  • 6.3 Earth Survey
  • 6.3.1 General requirements
  • 6.3.2 Earth Control Network Measurement
  • 6.3.3 Elevation System Test
  • 6.3.4 Accuracy detection
  • 6.4 Photo Control Measurement
  • 6.4.1 General requirements
  • 6.4.2 Technical Preparation
  • 6.4.3 control point layout, measurement and requirements
  • 6.5 Photo editing
  • 6.5.1 General Requirements
  • 6.5.2 Terrain Feature Adjustment
  • 6.6 Indoor Mapping
  • 6.6.1 Digital aerial triangulation
  • 6.6.2 Terrain Data Collection
  • 6.6.3 DEM acquisition and editing
  • 6.6.4 Publishing Data Editing
  • 6.6.5 Publishing Data Sub Edition Processing
  • 6.7 Transfer of Achievements
  • 6.7.1 Joint Aerial Photography Results
  • 6.7.2 Land-linked Test Results
  • 6.7.3 Photograph Control Measurement and Drawing Results
  • 6.7.4 Indoor Mapping Results
  • 6.8 Submitting Results
  • 7 Joint Survey and Inspection
  • 7.1 Basic Requirements
  • 7.2 Determination of the location of country borders in the field
  • 7.3 Landmark Location Determination and Measurement
  • 7.3.1 Landmark number
  • 7.3.2 Landmark Location Selection and erection requirements
  • 7.3.3 Boundary pile erection
  • 7.3.4 Landmark Measurement
  • 7.3.6 Finishing
  • 7.4 map repair and plot
  • 7.5 Printing of the Protocol Drawings
  • 7.6 Table Printing
  • 7.7 Outcome requirement
  • 7.7.1 Type of achievement
  • 7.7.2 Submitting the Results and Filling in the Delivery List
  • 8 Quality Control
  • 8.1 Basic requirements
  • 8.2 Inspection and Acceptance of Surveying and Mapping Results of Border Topographic Maps
  • 8.2.1 Checking Acceptance Requirements
  • 8.2.2 Checking Acceptance Content
  • 8.3 Inspection and acceptance of joint surveys and inspections of national borders
  • 8.3.1 Checking Acceptance Requirements
  • 8.3.2 Checking Acceptance Content
  • Appendix A (Informative) Landmark Registration Form
  • Appendix B (Informative) Landmark Coordinates and Elevation List
  • Appendix C (Informative) Landmark Coordinates and Elevation Test Results Table
  • Appendix D (Informative) Translation of the same geographical element with different names on the national border Table
  • Appendix E (Informative) Geographic Name Change Table
  • Appendix F (informative) Protocol drawings and drawings

1 Scope

This standard stipulates general principles, preparatory preparations, mapping of boundary topographic maps, joint surveys and inspections, and quality control of terrestrial borders.

Face request.

This standard is applicable to boundary surveying and mapping work in demarcation, demarcation and joint inspection of land borders.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 12340 1.25000 1.50000 1.100000 topographic map aerial photogrammetry internal code

GB/T 12341 1.25000 1.50000 1.100000 topographic map aerial photography measurement field specification

GB/T 13977 1.5000 1.10000 topographic map aerial photogrammetry field specification

GB/T 14511 map printing specification

GB/T 17941 Quality Requirements for Digital Surveying and Mapping Achievements

GB/T 18316 Digital Surveying and Mapping Achievements Quality Inspection and Acceptance

GB/T 23236 Digital Aerial Photogrammetry Air Triangulation Specifications

GB/T 24356 Quality Inspection and Acceptance of Surveying and Mapping Achievements

GB/T 27919 IMU/GPS Assisted Aerial Photography Technical Specifications

GB/T 27920.1 Digital aerial photography specification part 1. Frame digital aerial photography

GB/T 27920.2 Digital aerial photography specification Part 2. Push-broom digital aerial photography

CH/T 1001 Summary of Mapping Techniques

CH/T 1004 Surveying and Mapping Technology Design Regulations

CH/T 1015.2 Basic geographical information digital product 1.100001.50000 Production technical specification part 2. Digital high

Model (DEM)

CH/T 3006 Digital Aerial Photogrammetry Control Measurement Specification

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 National borders

National border boundary

Separate the territorial and territorial waters between a country and its neighbors, and divide the vertical plane above and below the earth.

The dividing line between the territories of neighboring countries.

[GB/T 33186-2016, definition 3.1] […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 35 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35765-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
35 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35765-2017

$530.00