Valid

GB/T 35583-2017Method of measuring abrasion resistance of images on copied pages (English PDF)

复印品图像抗磨损性的测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35583-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35583-2017 is the English-translated version of 复印品图像抗磨损性的测试方法.

GB/T 35583-2017 is the Chinese standard "Method of measuring abrasion resistance of images on copied pages". Its scope clause reads: This standard specifies the principle, equipment, spline fabrication, test procedures, test results, and tests for the test method of anti-abrasiveness of copy image. report.

This standard applies to photocopiers for copying. Electrostatic printer prints can refer to the implementation. Its clauses include terms and definitions; test principle; test conditions; test equipment.

Found what you need?

Document preview — GB/T 35583-2017

National Standard of the People's Republic of China

ICS
37.100.01
Classification
N 47

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Test principle
  • 5 Test Condition
  • 6 Test Equipment
  • 6.1 Wear Resistance Tester
  • 6.2 Reflection Densitometer
  • 7 Production of friction splines
  • 7.1 Making Samples for Beta
  • 7.2 Making Sample Test Paper
  • 7.3 Equipment for making proofs
  • 7.4 Making proofs
  • 7.5 Production of Friction Splines
  • 8 Test Step
  • 8.1 Test 4 before friction
  • 8.2 Friction Test
  • 8.3 Test after friction
  • 9 Test result
  • 9.1 Calculation of Test Results
  • 9.2 Test result value
  • 10 Content of the test report
  • Appendix A (Informative) Copy Photographs of Wear Resistance Test Version

1 Scope

This standard specifies the principle, equipment, spline fabrication, test procedures, test results, and tests for the test method of anti-abrasiveness of copy image.

report.

This standard applies to photocopiers for copying. Electrostatic printer prints can refer to the implementation.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 13963 Electrophotographic (including multifunction) device terminology

GB/T 24988 copy paper

3 Terms and Definitions

The terms and definitions defined in GB/T 13963 and the following terms apply to this document.

3.1 Wear resistance

The ability to suppress the friction of the toner on the surface of the print image is expressed by the density change of the image of the print image before and after rubbing.

4 Test principle

Repeatedly rubbing the image of the copy with an abrasion resistance tester to measure the change in image density before and after the rubbing of the copy image.

Reflects the ability of print images to resist wear.

5 test conditions

5.1 Ambient temperature and humidity conditions

temperature. 18°C~28°C; relative humidity. 40%~60%.

5.2

When measuring the image density, 5 test sheets of the same batch as the proof sheet should be laid under the test sheet.

5.3

Image Density Test Select the absolute density value of the ISO A state.

6 test equipment

6.1 Wear Resistance Tester

Figure 1 shows the structure of the friction test part of the abrasion resistance tester. The friction spline (abbreviated as the friction spline) passes through the holder.

Fixed on a flat and smooth friction platform (see Figure 2), the transmission rod drives the friction head to make horizontal movement. Friction medium through friction

The fixture on the head is fastened to the friction head (see Figure 3).

The configuration of the abrasion resistance tester is as follows.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35583-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35583-2017

$135.00