Valid

GB/T 35436-2017Interface design specification for standard modules of science experiment rack in space station (English PDF)

空间站科学实验柜标准模块接口设计规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (24 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35436-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

April 1, 2018

Scope

GB/T 35436-2017 is the English-translated version of 空间站科学实验柜标准模块接口设计规范.

GB/T 35436-2017 is the Chinese standard "Interface design specification for standard modules of science experiment rack in space station".

Its scope clause reads: This standard specifies the configuration of the standard module of the space station scientific experiment cabinet, and the mechanical, electrical, thermal interface design and verification between the scientific experiment cabinet Claim.

This standard applies to the scientific experiment on the space station standard module cabinet, but also applies to the standard module for the transport of cargo spacecraft.

Note. In this standard does not cause ambiguity, the scientific experiment cabinet referred to as the experimental cabinet. Its clauses include terms, definitions and abbreviations.

Found what you need?

Document preview — GB/T 35436-2017

National Standard of the People's Republic of China

ICS: 49.045
Classification: V 22

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 Configuration and size
4.1 Classification
4.2 standard direct module configuration
4.3 standard lock box module configuration
4.4 standard drawer module configuration
5 design requirements
5.1 Quality
5.2 volume
5.3 centroid position
5.4 Material Selection
5.5 fasteners
5.6 Strength and stiffness
5.7 Surface treatment
5.8 and experimental cabinet interface
5.9 Ergonomics Design
5.10 safety, reliability and maintainability design
5.11 logo
6 verification and testing
7 Packaging and transportation
Appendix A (informative) scientific experiment cabinet and the relationship between the standard module
Appendix B (informative) SPU expansion module
Appendix C (informative) quick release panel
Appendix D (informative) SDU expansion module
Appendix E (Informative) Standard Module and Laboratory Mechanical Installation Interface
References

1 Scope

This standard specifies the configuration of the standard module of the space station scientific experiment cabinet, and the mechanical, electrical, thermal interface design and verification between the scientific experiment cabinet

Claim.

This standard applies to the scientific experiment on the space station standard module cabinet, but also applies to the standard module for the transport of cargo spacecraft.

Note. In this standard does not cause ambiguity, the scientific experiment cabinet referred to as the experimental cabinet.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 1804 General tolerances Tolerances for linear and angular dimensions without tolerances

GB/T 35435-2017 Space station scientific experiment cabinet generic design specification

GB/T 35439-2017 Space Station Applications Payloads Security, Reliability and Maintainability General Requirements

GB/T 34829-2017 space station application payload data communication specification

GJB151 military equipment and subsystems electromagnetic emission and sensitivity requirements

GJB450 equipment development and production of the reliability outline

GJB1027 carrier, upper class and spacecraft test requirements

Spacecraft thermal equilibrium test method

Maintainability test and evaluation of GJB2072

GJB2706 spacecraft modal test method

GJB4009 astronaut system requirements for spacecraft applications

Ergonomics Requirements and Evaluation Methods of Spacecraft Design for Spacecraft Engineering

GJB7358 spacecraft hoisting, turning, parking, transportation, storage and general technical requirements

QJ20054 Aerospace type fastener selection guide

3 Terms, definitions and abbreviations

3.1 Terms and definitions

The following terms and definitions apply to this document.

3.1.1 Experiment cabinet

Under the constraints of the flight platform resources, there is a unified interface of machine, electricity, and heat, which is suitable for supporting different disciplines to carry out different experimental tasks

With technical facilities.

Example. International Standard Payload Enclosure (ISPR) on the ISS.

[GB/T 30114.1-2013, Definition 4.7] […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 45570-2025|GB/T 45571-2025|GB/T 46556-2025|GB/T 46560-2025|GB/T 43928-2024|GB/T 41040-2021

How to Download GB/T 35436-2017

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.