Valid

GB/T 35251-2017Waste pyrolysis and incineration treatment device (English PDF)

垃圾裂化焚烧装置

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35251-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35251-2017 is the English-translated version of 垃圾裂化焚烧装置.

GB/T 35251-2017 is the Chinese standard "Waste pyrolysis and incineration treatment device".

Its scope clause reads: This standard specifies the garbage cracking incineration plant (hereinafter referred to as the device) terms and definitions, models and specifications, requirements, test methods, inspection And acceptance, marking, paint, packaging and accompanying documents.

This standard applies to low heat value greater than 4.18MJ/kg of garbage incineration plant. A single device for the handling capacity of 20t/d to 250t/d (including the upper and lower limits). This standard does not apply to the treatment of hazardous waste.

Found what you need?

Document preview — GB/T 35251-2017

National Standard of the People's Republic of China

ICS
13.020.40
Classification
J 88

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 models and specifications
  • 5 Requirements
  • 6 test method
  • 7 inspection and acceptance
  • 8 logo, paint, packaging and random files
  • Appendix A (informative) garbage cracking incineration plant structure diagram

1 Scope

This standard specifies the garbage cracking incineration plant (hereinafter referred to as the device) terms and definitions, models and specifications, requirements, test methods, inspection

And acceptance, marking, paint, packaging and accompanying documents.

This standard applies to low heat value greater than 4.18MJ/kg of garbage incineration plant. A single device for the handling capacity of

20t/d to 250t/d (including the upper and lower limits).

This standard does not apply to the treatment of hazardous waste.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 700 carbon structural steel

GB/T 3766 hydraulic drive systems and components of the general rules and safety requirements

GB/T 3797 electrical control equipment

GB 4053.1 Fixed ladders and platforms - Safety requirements - Part 1. Steel ladders

GB 4053.2 Fixed ladders and platforms - Safety requirements - Part 2. Steel ladders

GB 4053.3 Fixed ladders and platform safety requirements - Part 3. Industrial guard railings and steel platforms

GB 5226.1 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General specifications

GB 8978 Integrated Wastewater Discharge Standard

GB/T 13306 signs

GB/T 14048.1 low-voltage switchgear and control equipment Part 1. General

GB 18485 Domestic Waste Incineration Pollution Control Standard

GB/T 19867.1 arc welding process

GB/T 23294 wear refractory

GB 50057 lightning protection design specifications

GB 50058 explosion hazardous environment power plant design specifications

GB 50093 Automatic Instrumentation Engineering Construction and Quality Acceptance Specification

GB 50235 industrial metal pipe construction specifications

GB 50273 Boiler Installation Construction and Acceptance Specification

CJ/T 313 Garbage sampling and analysis methods

Technical specification for construction of electric power

HJ/T 20 Industrial solid waste sampling Sampling specifications

JB/T 1615 boiler paint and packaging technology conditions

JB/T 5000.12 Heavy machinery General technical requirements Part 12. Painting

JB/T 7258 general purpose centrifugal blower

JB/T 9568 Power system relays, protection and automatic devices General technical conditions

NAS1638-2011 Oil Cleanliness Grading Standards […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35251-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35251-2017

$205.00