GB/T 35226-2017Specifications for surface meteorological observation - Air temperature and humidity (English PDF)
地面气象观测规范 空气温度和湿度
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35226-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35226-2017 is the English-translated version of 地面气象观测规范 空气温度和湿度.
GB/T 35226-2017 is the Chinese standard "Specifications for surface meteorological observation - Air temperature and humidity". Its scope clause reads: This standard specifies the ground meteorological observation of air temperature and humidity observation of the technical requirements and observation methods.
This standard applies to ground meteorological observation of air temperature and humidity observations. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 35226-2017
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- A 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Air temperature
- 3.2 Air humidity
- 3.3 Vapor pressure
- 3.4 Saturated vapor pressure
- 3.5 Relative humidity
- 3.6 Dew point temperature
1 Scope
This standard specifies the ground meteorological observation of air temperature and humidity observation of the technical requirements and observation methods.
This standard applies to ground meteorological observation of air temperature and humidity observations.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 35221 General Rules for Surface Weather Observation
GB/T 35225 specifications for surface meteorological observation pressure
GB/T 35237 ground meteorological observation standard automatic observation
3 Terms and definitions
GB/T 35221 and defined by the following terms and definitions apply to this document.
3.1 Air temperature
In the meteorological observation, the temperature of the air at a height of 1.50m from the ground is measured in a radiation protection device such as a veranda.
Note. The unit is Celsius (°C).
3.2 Air humidity
Ground meteorological observation is determined in the shutter and other radiation protection device from the ground height of 1.50m air humidity, referred to as humidity.
Note Humidity is expressed as vapor pressure, relative humidity and dew point temperature.
3.3 Vapor pressure
Part of the air-water vapor pressure in the unit area.
Note. The unit is hectopascals (hPa).
3.4 Saturated vapor pressure
Under certain temperature and pressure, the vapor pressure of saturated air reaches saturation.
3.5 Relative humidity
The ratio of the actual vapor pressure in the air to the saturated vapor pressure at that time.
Note. Expressed in percentage (%).
3.6 Dew point temperature
Air in the water vapor content and pressure conditions, reduce the temperature when the temperature reaches saturation.
Note. The unit is Celsius (°C).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 20483-2025Land desertification monitoring method
- GB/T 22385-2025Specification for acceptance of dam safety monitoring system
- GB/T 45530-2025Technical specification for earth-rockfill dam safety monitoring
- LY/T 3372-2024Specification for positioning observation of grassland ecosystem
- GB/T 42477-2023Specifications for meteorological observation and data inspection and correction of photovoltaic power stations
- GB/T 43238-2023Test requirements for satellite field experiments of China radiometric calibration sites - General rule
Similar standards
How to Download GB/T 35226-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 35226-2017
$235.00