Valid

GB/T 34917-2017Determination of gelation degree of unplasticized poly(vinyl chloride)(PVC-U) products—Torque rheometer method (English PDF)

硬聚氯乙烯(PVC-U)制品凝胶化度的测定 转矩流变仪法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34917-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 34917-2017 is the English-translated version of 硬聚氯乙烯(PVC-U)制品凝胶化度的测定 转矩流变仪法.

GB/T 34917-2017 is the Chinese standard "Determination of gelation degree of unplasticized poly(vinyl chloride)(PVC-U) products—Torque rheometer method". Its scope clause reads: This standard specifies the use of torque rheometer determination of rigid polyvinyl chloride (hereinafter referred to as PVC-U) gelation method.

This standard applies to the determination of the degree of gelation of PVC-U products, PVC-U is also suitable for processing PVC-U gelation process Degree of determination. Its clauses include terms and definitions; principle.

Found what you need?

Document preview — GB/T 34917-2017

National Standard of the People's Republic of China

ICS
83.140.01
Classification
G 33

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 principle

1 Scope

This standard specifies the use of torque rheometer determination of rigid polyvinyl chloride (hereinafter referred to as PVC-U) gelation method.

This standard applies to the determination of the degree of gelation of PVC-U products, PVC-U is also suitable for processing PVC-U gelation process

Degree of determination.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 1033.1 Determination of plastic non-foam density - Part 1. Immersion method, liquid pyknometer method and titration method

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 PVC gelation of PVC

Under the action of thermal energy and mechanical energy, the multi-layer structure of PVC resin particles gradually deconstructs and breaks into primary particles, and most of the micro-crystals

The melted, microcrystalline melts at the primary particle interface release the banding molecules through the adjacent primary particles. Subsequently, the cooled microcrystal is cooled down to generate secondary

Raw microcrystalline, the primary microcrystalline primary particles of the primary microcrystal will be linked into a three-dimensional network structure with secondary crystallites as crosslinking points.

Note. The gelation of PVC can also be referred to as fusion of PVC.

3.2 Gelation degree of gelation

The degree of progress of PVC gelation.

Note. The degree of gelation can also be referred to as the degree of degree of fusion.

3.3 Reference compound

The recipe is exactly the same as the sample being tested, and the compound does not gel the PVC during the compounding process.

4 principle

For the same PVC compound, the higher the degree of gelation, the smaller the torque torque curve of the minimum torque, the gelation torque and minimum torque

The smaller the difference, the gel of the test sample can be calculated from the ratio of this difference of the sample to the reference compound

Degree of.

NOTE In several cases, the torque flow curves are given in Appendix A, Appendix B, Appendix C.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34917-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34917-2017

$145.00