GB/T 34252-2017Test method for crazing resistance of domestic ceramic wares (English PDF)
日用陶瓷器抗釉裂测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34252-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 7, 2017
Implementation date
April 1, 2018
Scope
GB/T 34252-2017 is the English-translated version of 日用陶瓷器抗釉裂测试方法.
GB/T 34252-2017 is the Chinese standard "Test method for crazing resistance of domestic ceramic wares". Its scope clause reads: This standard specifies the daily glaze anti-glaze test methods.
This standard applies to the surface glaze daily pottery, stoneware, porcelain glaze resistance test. Its clauses include terms and definitions; principle; apparatus and equipment; sample.
Found what you need?
Document preview — GB/T 34252-2017
National Standard of the People's Republic of China
- ICS
- 81.060.20
- Classification
- Y 24
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Terms and definitions
- 3 principle
- 4 apparatus and equipment
- 5 sample
1 Scope
This standard specifies the daily glaze anti-glaze test methods.
This standard applies to the surface glaze daily pottery, stoneware, porcelain glaze resistance test.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Glaze cracked crazing
Glaze layer cracks due to sufficient tension of the glaze due to wet expansion or hot pressing of the carcass.
2.2 Wet expansion
Carcass due to the expansion of water absorption.
2.3 Thermal shock
The temperature changes dramatically.
3 principle
The sample was placed in an autoclave and tested for glaze cracking caused by wet expansion after several cycles under a certain pressure, saturated water vapor. (Should be slow
Slowly increase and decrease the vapor pressure to reduce the possibility of thermal shock. The sample should be inspected after each cycle, and the glaze checked by staining the surface of the sample
Whether the surface is cracked )
4 apparatus and equipment
4.1 autoclave
The steam pressure is at least 1.0 MPa and can hold multiple samples. Should be equipped with manometer, safety valve, deflation valve, at above atmospheric pressure
Test accuracy of ± 34kPa, pressure gauge and built-in to meet the requirements of a constant steam pressure heat source device.
4.2 staining aqueous solution
Eosin containing (5 ± 1) g/L and a daily wash solution of (5 ± 1) g/L.
4.3 other
Soft cotton cloth.
5 sample
At least 7 unused samples.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34252-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34252-2017
$65.00