GB/T 34160-2017Test method of conversion efficiency of terrestrial photovoltaic(PV) modules (English PDF)
地面用光伏组件光电转换效率检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34160-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 7, 2017
Implementation date
April 1, 2018
Scope
GB/T 34160-2017 is the English-translated version of 地面用光伏组件光电转换效率检测方法.
GB/T 34160-2017 is the Chinese standard "Test method of conversion efficiency of terrestrial photovoltaic(PV) modules". Its scope clause reads: This standard specifies the method of photoelectric conversion efficiency of photovoltaic modules on the ground.
This standard applies to flat photovoltaic modules (including crystalline silicon, thin film components, etc.). This standard does not apply to double-sided photovoltaic modules, concentrating photovoltaic modules. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34160-2017
National Standard of the People's Republic of China
- ICS
- 27.160
- Classification
- F 12
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Total component totalmodulearea
- 3.2 Active component
- 3.3 Module efficiency
1 Scope
This standard specifies the method of photoelectric conversion efficiency of photovoltaic modules on the ground.
This standard applies to flat photovoltaic modules (including crystalline silicon, thin film components, etc.).
This standard does not apply to double-sided photovoltaic modules, concentrating photovoltaic modules.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
ISO /IEC 17025 testing and calibration laboratory capacity requirements (Generalrequirementsforthecompetenceof testingandcalibrationlaboratories)
IEC 60904-1 Photovoltaic devices - Part 1. Measurement of PV current-voltage characteristics (Photovoltaicdevices-Part 1.
Measurementofphotovoltaiccurrent-voltagecharacteristics)
IEC 60904-2 Photovoltaic devices - Part 2. Requirements for standard solar cells (Photovoltaicdevices-Part 2.Require- mentsforreferencesolardevices)
IEC 60904-9 Photovoltaic devices Part 9. Solar simulator performance requirements (Photovoltaicdevices-Part 9.Solar simulatorperformancerequirements)
IEC 61215 ground crystalline silicon photovoltaic modules (PV) design identification and stereotypes (Crystalinesiliconterrestrialphoto- voltaic (PV) modules-Designqualificationandtypeapproval)
IEC 61646 Surface-Mount Thin-Film Terrestrial Photovoltaic (PV) modules-Designqualificationandtypeapproval)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Total component totalmodulearea
The area defined by the outer edge of the upper surface of the component, which is the normal projection area of the incident surface of the component.
Note. The total area of the components is the sum of the total area of the solar cells and the area of the uncovered solar cells, and the vertical projection area of the upper surface of the bezel (if any)
Included.
3.2 Active component
The effective area of a component equals the total area of the solar cells in the component.
Note 1. The effective area of the crystalline silicon module includes the area of the line that is removed. The effective area of the thin film module includes the dead area and the scribe area.
Note 2. The effective area of the component is sometimes referred to as the component window area.
3.3 Module efficiency
Under specified test conditions, the percentage of the maximum power of the illuminated component to the irradiance incident on the total area of the component.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34160-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34160-2017
$90.00