GB/T 34096-2017Mobile payment—Test methods for contactless reader terminal based on 2.45GHz range controlled communication technology (English PDF)
手机支付 基于2.45GHz RCC(限域通信)技术的非接触式读写器终端测试方法
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34096-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2017
Implementation date
February 1, 2018
Scope
GB/T 34096-2017 is the English-translated version of 手机支付 基于2.45GHz RCC(限域通信)技术的非接触式读写器终端测试方法.
GB/T 34096-2017 is the Chinese standard "Mobile payment—Test methods for contactless reader terminal based on 2.45GHz range controlled communication technology".
Its scope clause reads: This standard specifies the cell phone payment method based on 2.45GHzRCC (limited area communications) non-contact reader terminal test method, including Including the overall technical characteristics of testing, reader electrical characteristics and non-contact communication interface testing, POS terminal hardware testing and so on Test Methods.
This standard applies to non-contact based on 2.45GHzRCC (limited area communication) technology reader terminal equipment. Its clauses include terms and definitions, abbreviations.
Found what you need?
Document preview — GB/T 34096-2017
National Standard of the People's Republic of China
- ICS
- 33.050.99
- Classification
- M 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions, Abbreviations
- 3.1 Terms and definitions
- 3.2 Abbreviations
- 4 test items
- 5 test environment
- 5.1 room temperature test environment
- 5.2 Test System Structure
- 5.3 Test Equipment
- 5.3.1 Device under test
- 5.3.2 test equipment and tools
- 5.3.3 test software
- 6 Technical characteristics of the test
- 6.1 Overall characteristics of the test
- 6.1.1 credit card area identification test
- 6.1.2 continuous credit card interval test
- 6.1.3 card read success rate test
- 6.1.4 Reading distance test
- 6.2 Reader Electrical Characteristics Test
- 6.2.1 Operating voltage test
- 6.2.2 Power Test
- 6.3 Reader non-contact communication interface test
- 6.3.1 Transmit Power Test
- 6.3.2 Frequency tolerance test
- 6.3.3 Frequency range test
- 6.3.4 Magnetic field strength test
- 6.3.5 Multiple responder conflict test
- 6.3.6 Communication distance test at room temperature
- 6.3.7 High and low temperature communication distance test
- 6.3.8 Communication success rate test
- 6.3.9 Long-time working communication success rate test
- 6.3.10 Anti-interference test on Bluetooth signal
- 6.3.11 Anti-interference test on WiFi signal
- 6.3.12 13.56MHz signal interference test (optional)
- 6.4 POS technical characteristics of the test
- 6.4.1 Screen Display (Optional)
- 6.4.2 Keyboard (optional)
- 6.4.3 Password Keyboard (optional)
- 6.4.4 transaction storage (optional)
- 6.4.5 Printer (optional)
- 6.4.6 Power and battery test (optional)
- 6.4.7 Security Testing
- 6.4.8 Electromagnetic Compatibility
- 6.4.9 high and low temperature, constant hot and humid test
- 6.4.10 Vibration adaptability test
- 6.4.11 Free-fall test
1 Scope
This standard specifies the cell phone payment method based on 2.45GHzRCC (limited area communications) non-contact reader terminal test method, including
Including the overall technical characteristics of testing, reader electrical characteristics and non-contact communication interface testing, POS terminal hardware testing and so on
Test Methods.
This standard applies to non-contact based on 2.45GHzRCC (limited area communication) technology reader terminal equipment.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2312-1980 information exchange with Chinese character encoding character set basic set
Information technology - Equipment safety - Part 1. General requirements
Radio disturbance limits and methods of measurement for information technology equipment GB/T 9254-2008
Information technology equipment Immunity limits and methods of measurement GB/T 17618-2015
Technical requirements and test methods for reliability of mobile handsets
Technical Requirements for Micropower (Short Range) Radio Equipment Ministry of Foreign Affairs No [2005] No. 423
3 Terms and Definitions, Abbreviations
3.1 Terms and definitions
The following terms and definitions apply to this document.
3.1.1 Limited communication
Communication distance range controllable wireless proximity communication technology.
3.1.2
2.45GHz smart card
Smart cards based on 2.45GHz RCC technology include RF- (U) SIM card, RF-Mini SIM card, RF-
NanoSIM card.
3.1.3 Initiator
2.45GHzRCC (limited area communication) System Distance Control The initiation of the communication request to the party.
3.1.4 Responder target
2.45GHzRCC (Restricted Communication) The system that responds to command requests.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34096-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34096-2017
$385.00