GB/T 38624.2-2021Internet of things—Gateway—Part 2: Technical requirements of gateway accessing the public telecommunication network (English PDF)
物联网 网关 第2部分:面向公用电信网接入的网关技术要求
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38624.2-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2021
Implementation date
May 1, 2022
Scope
GB/T 38624.2-2021 is the English-translated version of 物联网 网关 第2部分:面向公用电信网接入的网关技术要求.
GB/T 38624.2-2021 is the part of the Chinese series on the Internet of things gateway that covers the gateway connected to a public telecommunication network.
It sets the application scenarios, the system architecture, the technical framework, the general technical requirements, the configuration and management requirements and the security requirements.
It applies to the design, development and testing of these gateways. Device makers, operators and system integrators use it. Issued on 11 October 2021, it has applied since 1 May 2022.
Found what you need?
Document preview — GB/T 38624.2-2021
National Standard of the People's Republic of China
- ICS
- 33.050.99
- Classification
- M 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Abbreviations
- 5 Application scenarios and system architecture
- 6 Technical Framework
- 6.1 Interface model and gateway protocol
- 6.2 Northbound interface
- 6.3 Southbound interface
- 7 General technical requirements
- 7.1 Protocol conversion
- 7.2 Interworking with public telecommunication networks
- 7.3 WSN terminal status monitoring
- 7.4 Software and configuration parameter update
- 8 Configuration and management requirements
- 8.1 Management Method
- 8.2 Configuration management requirements
- 8.3 Performance management requirements
- 8.4 Fault management requirements
- 9 Safety requirements
- 9.1 Gateway device authentication
- 9.2 Business authentication
- 9.3 Data Security
- 9.4 Safety Management
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
This document is the second part of GB/T 38624 "Internet of Things Gateway". GB/T 38624 has released the following parts.
---Part 1: Gateway technical requirements for sensing device access;
---Part 2: Technical requirements for gateways for public telecommunication network access.
Introduction
The universal access gateway for the Internet of Things for public telecommunication network access is a key device that connects the network and sensors. Use IoT universal access The ingress gateway can ensure the connection between sensors, and at the same time can realize the intercommunication with the application platform through the public telecommunication network. Currently many types In the IoT application environment of sensors and multi-industry applications, the IoT universal access gateway for public telecommunication network access can effectively improve transmission The operating efficiency of the sensor solves the problems of protocol processing, sensor management, and security in IoT business applications, and has become an IoT system One of the core equipment. Most of the Internet of Things systems in the country use Internet of Things gateway devices, but they lack a unified Internet of Things universal access network Relevant requirements related to technology and functions.
At present, the Internet of Things in my country is still in the initial stage of development, and it is a favorable time for the standardization of Internet of Things gateways for public telecommunication network access.
In the critical period of the machine and the critical period, the requirements of the universal access gateway for the Internet of Things for public telecommunication network access shall be clarified as soon as possible to guide the system deployment of the Internet of Things.
Improving the interoperability of related technologies and products is necessary to promote the healthy, sustainable and large-scale development of the Internet of Things. At the same time The document can also be used to guide the development, system construction, and deployment implementation of the Internet of Things universal access gateway equipment for public telecommunication network access.
GB/T 38624 is intended to be composed of three parts.
---Part 1: Gateway technical requirements for sensing device access. The purpose is to standardize the Internet of Things network for sensing device access Related functional requirements and general data configuration requirements.
---Part 2: Technical requirements for gateways for public telecommunication network access. The purpose is to standardize the gateway for public telecommunication network access The network interface, general technical requirements, configuration and management requirements, and safety requirements of the company.
---Part 3: Gateway test method for public telecommunication network access. The purpose is to standardize the surface according to the technical requirements of Part 2. A test method for gateways connected to public telecommunication networks.
1 Scope
This document specifies the application scenarios, system architecture, technical framework, general Technical requirements, configuration and management requirements, safety requirements, etc.
This document is applicable to the design, development and testing of IoT gateways for public telecommunication network access.
2 Normative references
The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 38624.1 Gateway of the Internet of Things Part 1: Technical requirements for gateways for sensing device access
YD/T 1107900/1800MHz TDMA digital cellular mobile communication network General Packet Radio Service (GPRS) wireless interface specification Fan. media access control/radio link control (MAC/RLC) protocol
YD/T 1214900/1800MHz TDMA digital cellular mobile communication network General Packet Radio Service (GPRS) equipment technical requirements Request. mobile station
YD/T 1371 (all parts) 2GHz TD-SCDMA digital cellular mobile communication network Uu interface physical layer technical requirements
YD/T 1372 (all parts) 2GHz TD-SCDMA digital cellular mobile communication network Uu interface layer 2 technical requirements
YD/T 1373 2GHz TD-SCDMA digital cellular mobile communication network Uu interface RRC layer technical requirements
YD/T 1475 Access Network Technical Requirements Based on Passive Optical Network (EPON) in Ethernet Mode
YD/T 1530 Access network technology requires the second generation of asymmetric digital subscriber line (ADSL2) with spectrum expansion
YD/T 1544 (all parts) 2GHz WCDMA digital cellular mobile communication network Uu interface physical layer technical requirements (first stage)
YD/T 1545 (all parts) 2GHz WCDMA digital cellular mobile communication network Uu interface layer two technical requirements (first order part)
YD/T 1546 2GHz WCDMA digital cellular mobile communication network Uu interface RRC layer technical requirements (first stage)
YD/T 1547 WCDMA Digital Cellular Mobile Communication Network Terminal Equipment Technical Requirements (Phase 3)
YD/T 1558 800MHz/2GHz cdma2000 digital cellular mobile communication network equipment technical requirements One)
YD/T 1674 2GHz cdma2000 digital cellular mobile communication network broadcast multicast service (BCMCS) equipment technical requirements. Incoming terminal (AT)
YD/T 1843 (all parts) 2GHz TD-SCDMA digital cellular mobile communication network high-speed uplink packet access (HSUPA) Uu interface physical layer technical requirements
YD/T 1845 2GHz TD-SCDMA digital cellular mobile communication network high-speed uplink packet access (HSUPA) Uu interface RRC layer technical requirements
YD/T 1846 (all parts) 2GHz TD-SCDMA digital cellular mobile communication network high-speed uplink packet access (HSUPA) Uu interface layer two technical requirements
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 38624.2-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 38624.1-2020 — Internet of things—Gateway—Part 1: Gateway technology requirements for access of sensing device
GB/T 38624.3-2024 — Internet of Things (IoT) - Gateway - Part 3: Test method of gateway accessing the public telecommunication network
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 38624.2-2021
$225.00