GB/T 33905.1-2017Intelligent sensor—Part 1: General rules (English PDF)
智能传感器 第1部分：总则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33905.1-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2017
Implementation date
February 1, 2018
Scope
GB/T 33905.1-2017 is the English-translated version of 智能传感器 第1部分：总则.
GB/T 33905.1-2017 is Part 1 of GB/T 33905 and lays down the general rules for intelligent sensors.
It sets out the architecture of such a sensor, the data processing subsystem, the sensor subsystem, the man-machine interface, the communication interface, the electrical output subsystem and the power supply unit, and it points to the interface specification, the characteristics and classification and the reliability design and evaluation.
It then gives the common methods for testing function and performance: the general guidelines on working conditions, cost, reproducibility and the treatment of results, the environmental, source, load, mounting and vibration conditions for the sample, how samples are chosen, delivered and identified, and the test organisation, sequence, interruptions and reporting.
It defines variable, signal, range and span. It was issued on 31 July 2017 and has applied since 1 February 2018.
Found what you need?
Document preview — GB/T 33905.1-2017
National Standard of the People's Republic of China
- ICS
- 29.020
- Classification
- L 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 smart sensor architecture
- 4.1 Overview
- 4.2 data processing subsystem
- 4.3 Sensor Subsystem
- 4.4 man-machine interface
- 4.5 Communication Interface
- 4.6 Electrical Output Subsystem
- 4.7 Power Supply Unit
- 5 smart sensor interface specification
- 6 intelligent sensor characteristics and classification
- 7 Intelligent Sensor Reliability Design Methods and Evaluation
- 8 General guidelines
- 8.1 The actual working conditions
- 8.2 Economic aspects
- 8.3 Test reproducibility and comparability of test results
- 8.4 Test results of the treatment
- 8.5 Test results influenced by other tests
- 9 Tests and general conditions of the sample
- 9.1 Environmental test conditions
- 9.2 for the source conditions
- 9.3 Load conditions
- 9.4 Installation Location
- 9.5 External vibration
- 9.6 External mechanical constraints
- 9.7 Sample Selection
- 9.8 tested smart sensor delivery
- 9.9 Identification and Inspection
- 10 General test procedures and precautions
- 10.1 Test organization
- 10.2 Test Preparation
- 10.3 Selection of reference measuring equipment
- 10.4 Quality of input variables
- 10.5 Test sequence
- 10.6 Interruptions and durations for each group of measurements
- 10.7 Abnormal conditions and faults during the test
- 10.8 Restarting of the trial
- 10.9 Preheat
- 10.10 Measurement symbols and units
- 10.11 Test reports and test documents
Foreword
GB/T 33905 "smart sensor" is divided into 5 parts.
--- Part 1: General principles;
--- Part 2: IOT application rules;
--- Part 3: Terms;
--- Part 4: Performance evaluation methods;
--- Part 5: Inspection and routine test methods.
This section GB/T 33905 Part 1.
This section drafted in accordance with GB/T 1.1-2009 given rules.
Introduction
In the development of the Internet of Things industry chain, sensors as a carrier of Internet of Things perception, in the field of Internet of things is very important. In order to propel things Networking intelligent sensor technology and key product research and development and industrialization, and promote the application and promotion of the Internet of Things for the overall development of the Internet of Things For a solid foundation, the need to develop basic common standards for the Internet of things, smart sensors, the Internet of Things transmitter, smart meter method standards and Internet of Things Industry production and application of standards.
The basic common standards mainly focus on the overall advancement requirements of the basic common standards system and overall technical standards of the Internet of Things, Interconnection of networking components, interoperability and plug and play; to ensure the stability and reliability of the use of Internet of Things components. The basic common standards include "Things Network General Smart Sensor Interface Specification "," Total Internet of Things Intelligent Sensor Features and Classification "and" Total Internet of Things Intelligent Sensor Reliability Design Method and Evaluation "3 national standards.
Three types of smart sensors, IOT transmitter and smart meter are the core components of IoT. Smart sensor national standard This standard, including five parts. IOT transmitter national standards include "IoT pressure transmitter specification" "IoT differential pressure transmitter gauge Fan "" Internet of Things Current Transmitter Specifications "" Internet of Things Temperature Transmitter Specifications "4 products of national standards. Smart meter standards include "smart streaming General technical conditions for measuring instruments "" General technical conditions for intelligent temperature meters "" General technical conditions for intelligent recording instruments "3 products Country standard.
Around the Internet of Things industrial production and application needs, the need to develop interoperability of industrial Internet of Things series of national standards, including "Industrial Internet of Things Instrument identification protocol "" Industrial Internet of Things instrument application attribute agreement "" Industrial Internet of Things instrument interoperability agreement "" Industrial Internet of Things instrument service Service Agreement "4 national standards.
1 Scope
This section GB/T 33905 specifies the intelligent sensor architecture, intelligent sensors for functional and performance characteristics of the test Common methods and procedures.
This section applies to smart sensors. This section also applies to other types of sensors (provided that their differences are taken into account in advance).
For some intelligent sensors using MEMS components (such as chemical analyzers, flowmeters, etc.) and expected in special environments (such as burst Explosive gas environment) using smart sensors, but also with reference to other relevant national standards.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2828.1-2012 Sampling procedures for inspection - Part 1 - Batch-by-lot inspection by acceptance quality limit (AQL) plan
GB/T 34069-2017 Internet of Things general technical intelligence sensor characteristics and classification
GB/T 34068-2017 Internet of Things general technical smart sensor interface specification
GB/T 34071-2017 Methodology and Evaluation of Total Technical Intelligent Sensor Reliability for the Internet of Things
ISO 31 (all parts) Quantities and units
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Variable
Variable or generally measurable amount or condition (eg, temperature, flow rate, speed, signal, etc.). Remark GB/T 2900.56-2008, definition 351-21-01.
3.2 Signal
A physical variable that represents one or more variable information with one or more parameters. Remark GB/T 2900.56-2008, definition 351-21-51.
3.3 Range
The upper and lower limits of the quantity studied define the numerical range. Remark GB/T 2900.56-2008, the definition of 351-27-11.
3.4 Span
Algebraic difference between upper and lower measurement range. [GB/T 2900.77-2008, Definition 311-03-13]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 34069-2017General technology of internet of things—Characteristic and classification of intelligent sensor
- GB/T 34068-2017General technology of internet of things—Specification of intelligent sensor interface
- GB/T 34071-2017General technology for internet of things—Reliability design method and review for intelligent sensor
ISO 31
Similar standards
How to Download GB/T 33905.1-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 34068-2017 — General technology of internet of things—Specification of intelligent sensor interface
GB/T 34069-2017 — General technology of internet of things—Characteristic and classification of intelligent sensor
Secure payment via Stripe
Payments accepted
GB/T 33905.1-2017
$205.00