GB/T 33905.4-2017Intelligent sensor—Part 4: Methods of performance evaluation (English PDF)
智能传感器 第4部分：性能评定方法
This is a limited preview
Buy now to download the full PDF (29 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33905.4-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2017
Implementation date
February 1, 2018
Scope
GB/T 33905.4-2017 is the English-translated version of 智能传感器 第4部分：性能评定方法.
GB/T 33905.4-2017 is Part 4 of GB/T 33905 and sets out how the functions and the degree of intelligence of a smart sensor are evaluated.
It lists the basic information to be declared, that is performance parameters, functional description, manufacturer support and the documents the maker can supply, then the technical requirements and assessment methods: a functional assessment driven by checklists for general functions, configuration, tuning, operability and fault tolerance, and a performance test run under reference conditions and under influence quantities.
Clause 6 fixes the assessment report and Annex A adds credibility and throughput tests. It applies to smart sensors that turn physical, chemical or electrical quantities into digital or analogue signals, and to design review early in development. It was issued on 31 July 2017 and has applied since 1 February 2018.
Found what you need?
Document preview — GB/T 33905.4-2017
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- N 05
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 basic information
- 4.1 Performance parameters
- 4.2 Functional Description
- 4.3 Manufacturer Support
- 4.4 Manufacturer can provide the file information
- 5 Technical requirements and assessment methods
- 5.1 Functional Assessment
- 5.1.1 Overview
- 5.1.2 Intelligent Sensor Analysis
- 5.1.3 Assessment Requirements
- 5.2 Performance Test
- 5.2.1 Overview
- 5.2.2 Test Equipment
- 5.2.3 The basic requirements of the test process
- 5.2.4 Performance Test Reference Conditions
- 5.2.5 Test procedure under reference conditions
- 5.2.6 Test Procedure for Determining the Effect of Influence
- 5.3 Other
- 5.3.1 Visual inspection
- 5.3.2 Basic Information Verification
- 6 Assessment Report
- Appendix A (Normative) Additional test
- A.1 Credibility Tests
- A.2 Throughput test
- A.3 Other functional tests
- References
Foreword
GB/T 33905 "smart sensor" is divided into 5 parts.
--- Part 1. General principles;
--- Part 2. IOT application rules;
--- Part 3. Terms;
--- Part 4. Performance evaluation methods;
--- Part 5. Inspection and routine test methods. This section GB/T 33905 Part 4. This section drafted in accordance with GB/T 1.1-2009 given rules.
1 Scope
GB/T 33905 provisions of this part of the smart sensor function and intelligence evaluation methods, including the basic smart sensors Information, technical requirements and assessment methods and assessment report requirements.
This section applies to one or more of physical, chemical or electricity into a communication network or converted into analog electrical signals with digital signals Number of smart sensors, but also for smart sensors early development phase of the design review.
NOTE The methods specified in this standard are intended for manufacturers to determine the performance of their products as well as the user's or independent testing organization to verify the manufacturer's product performance specifications They provide guidance on the functional evaluation of smart sensors in the following ways.
Checklist for reviewing hardware and software functions in a structured way --- Test methods for measuring and rating performance, reliability and operability under different environmental and operating conditions.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2423.3 Environmental testing Part 2: Test methods Test Cab. Constant hot and humid test
GB/T 2900.56 Electrotechnical terminology control technology
GB/T 4208 enclosure protection (IP code)
GB/T 4798 (all parts) electrical and electronic products application environmental conditions
GB/T 17214 (all parts) industrial process measurement and control device operating conditions
GB/T 17614 (all parts) industrial process control system transmitter
GB/T 18268.1-2010 Electromagnetic compatibility requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements
GB/T 18271.1-2017 Process measurement and control devices - General performance evaluation methods and procedures Part 1: General
GB/T 18271.2-2017 Process measurement and control devices - General performance evaluation methods and procedures - Part 2: Reference conditions Test
GB/T 18271.3-2017 Process measurement and control devices - General performance evaluation methods and procedures - Part 3: Impact of influence Test
GB/T 18271.4-2017 Process measurement and control devices - General performance evaluation methods and procedures - Part 4: Assessment report of content
GB/T 33905.1 Smart Sensors Part 1: General
3 Terms and definitions
GB/T 2900.56, GB/T 17614 and GB/T 33905.1 and the following terms and definitions apply to this document.
3.1 Sensor
Directly with the measured phenomenon, the role of objects or substances measuring system components. Example:
Platinum thermal resistance of the resistance wire, the turbine turbine flowmeter, pressure gauge Bourdon tube, the float level gauge, the spectrometer of the photovoltaic cells, showing the temperature of the thermal paint
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 29 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.3Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 2900.56Electrotechnical terminology -- Control technology
- GB/T 4208Degrees of protection provided by enclosures (IP code)
- GB/T 18268.1-2010Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
- GB/T 18271.1-2017Process measurement and control devices -- General methods and procedures for evaluating performance -- Part 1: General considerations
- GB/T 18271.2-2017Process measurement and control devices -- General methods and procedures for evaluating performance -- Part 2: Tests under reference conditions
GB/T 4798 · GB/T 17214 · GB/T 17614
Similar standards
How to Download GB/T 33905.4-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17214.1-1998 — Industrial-process measurement and control equipment. Operating conditions. Part 1: Climatic conditions
GB/T 17214.2-2005 — Operating conditions for industrial-process measurement and control equipment -- Part 2: Power
GB/T 17214.3-2000 — Operating conditions for industrial-process measurement and control equipment. Part 3: Mechanical influences
Secure payment via Stripe
Payments accepted
GB/T 33905.4-2017
$495.00