GB/T 34071-2017General technology for internet of things—Reliability design method and review for intelligent sensor (English PDF)
物联网总体技术 智能传感器可靠性设计方法与评审
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34071-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2017
Implementation date
February 1, 2018
Scope
GB/T 34071-2017 is the English-translated version of 物联网总体技术 智能传感器可靠性设计方法与评审.
GB/T 34071-2017 is the Chinese standard "General technology for internet of things—Reliability design method and review for intelligent sensor".
Its scope clause reads: This standard specifies the overall technology in the Internet of Things smart sensors in the development of the reliability of the design process and reliability of the design review Trial methods and requirements.
This standard applies to the overall technology of intelligent sensors in the hardware program demonstration stage, the technical design stage, the detailed design stage, Trial production (production stereotypes) phase of the reliability of the design work and review work, as well as product demand analysis phase, software requirements analysis phase, Software Overview Design phase, the software design phase and software design phase of the reliability of the design work and review.
All businesses can root According to product characteristics and development needs, appropriate changes in content. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34071-2017
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 reliability design method
- 4.1 Overview
- 4.2 Hardware Reliability Design
- 4.3 Software Reliability Design
- 4.4 Data Communication Design Requirements
- 5 reliability assessment
- 5.1 Reliability Design Review Concept
- 5.2 The role of reliability design review
- 5.3 Review Objectives
- 5.4 Review Organization
- 5.5 Review content and requirements
- 5.6 Design Review Procedure
- Appendix A (informative) members of the assessment team responsibilities
- Appendix B (informative) design review checklist of issues
- Appendix C (Informative) Design Review Program Table
1 Scope
This standard specifies the overall technology in the Internet of Things smart sensors in the development of the reliability of the design process and reliability of the design review
Trial methods and requirements.
This standard applies to the overall technology of intelligent sensors in the hardware program demonstration stage, the technical design stage, the detailed design stage,
Trial production (production stereotypes) phase of the reliability of the design work and review work, as well as product demand analysis phase, software requirements analysis phase,
Software Overview Design phase, the software design phase and software design phase of the reliability of the design work and review. All businesses can root
According to product characteristics and development needs, appropriate changes in content.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2900.13 reliability, maintainability of the basic terms and definitions
GB/T 34068 Internet of Things overall technical intelligence sensor interface specification
3 Terms and definitions
GB/T 2900.13 defined and the following terms and definitions apply to this document.
3.1 Internet of Things
Based on the Internet, the traditional telecommunications network and other information carriers, so that all can be independently addressed ordinary physical objects to achieve interoperability of the network
Network. Ordinary object equipment, autonomous terminal interconnection and universal service intelligence is its three important features.
3.2 Internet of Things smart sensor
An information-generating device at the Internet of Things's Perceptual Recognition Layer that converts measurements to a standardized output signal that the Internet of Things can transmit
Sensor.
3.3 Reliability Design Review
Formal and independent inspection of existing or proposed designs to identify design sheets that may affect reliability and maintainability
Weak links, and possible improvements to accelerate design review.
3.4 Reliabilityworkitem
Instrument design process to complete the reliability of the design report, performance and functional test reports, environmental test reports, reliability test report
Report, reliability test report and on-site commissioning report in general.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 34071-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 34071-2017
$365.00