GB/T 32970-2016Longitudinal submerged-arc welded steel pipe for high pressure service at high temperatures (English PDF)
高温高压管道用直缝埋弧焊接钢管
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32970-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 29, 2016
Implementation date
July 1, 2017
Scope
GB/T 32970-2016 is the English-translated version of 高温高压管道用直缝埋弧焊接钢管.
GB/T 32970-2016 is the Chinese standard "Longitudinal Submerged-Arc Welded Steel Pipe for High Pressure Service at High Temperatures".
Its scope clause reads: This Standard specifies the terms and definitions, ordering contents, dimension, shape, weight and permissible deviation, technical requirements, test methods, inspection rules, as well as package, mark and quality certificate of the longitudinal submerged-arc welded steel pipe for high pressure serve at high temperature (hereinafter referred to as steel pipe).
This Standard is applicable to the carbon steel and alloy steel longitudinal submerged-arc welded steel pipe used by petroleum refining and coal chemical high temperature and high pressure pipes.
Its clauses include normative reference; terms and definitions; ordering contents; dimension, shape, weight and permissible deviation; technical requirements; test methods; inspection rules; package, mark and quality certificate.
It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on AUGUST 29, 2016 and took effect on JULY 1, 2017.
Found what you need?
Document preview — GB/T 32970-2016
National Standard of the People's Republic of China
- ICS
- 77.140.75
- Classification
- H 48
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative Reference4
- 3 Terms and Definitions6
- 4 Ordering Contents7
- 5 Dimension, Shape, Weight and Permissible Deviation7
- 6 Technical Requirements10
- 7 Test Methods21
- 8 Inspection Rules21
- 9 Package, Mark and Quality Certificate23
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
1 Scope
This Standard specifies the terms and definitions, ordering contents, dimension, shape, weight and permissible deviation, technical requirements, test methods, inspection rules, as well as package, mark and quality certificate of the longitudinal submerged-arc welded steel pipe for high pressure serve at high temperature (hereinafter referred to as steel pipe).
This Standard is applicable to the carbon steel and alloy steel longitudinal submerged-arc welded steel pipe used by petroleum refining and coal chemical high temperature and high pressure pipes.
2 Normative Reference
The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document.
GB/T 223.3 Methods for Chemical Analysis of Iron, Steel and Alloy - the Diantipyrylmethane Phosphomolybdate Gravimetric Method for the Determination of Phosphorus Content
GB/T 223.10 Methods for Chemical Analysis of Iron, Steel and Alloy - the Cupferron Separation-Chrome Azurol S Photometric Method for the Determination of Aluminum Content
GB/T 223.11 Iron, Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method
GB/T 223.14 Methods for Chemical Analysis of Iron, Steel and Alloy - The N- Benzoy-N-Phenylhydroxylamine Extraction Photometric Method for the Determination of Vanadium Content
GB/T 223.17 Methods for Chemical Analysis of Iron, Steel and Alloy - The Diantipyrylmethane Photometric Method for the Determination of Titanium Content
GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Thiosulfate Separation Iodimetric Method for the Determination of Copper Content
GB/T 223.23 Iron, Steel and Alloy - Determination of Nickel Content - The Dimethylglyoxime Spectrophotometric Method
GB/T 223.26 Iron, Steel and Alloy - Determination of Molybdenum Content - The Thiocyanate Spectrophotometric Method
GB/T 223.40 Methods for Chemical Analysis of Iron, Steel and Alloy; the Anion- Exchange Separation - Sulphochlorophenol S Photometric Method for the Determination of Niobium Content
GB/T 223.43 Iron Steel and Alloy - Determination of Tungsten Content - Gravimetric Method and Spectrophotometric Method
GB/T 223.60 Methods for Chemical Analysis of Iron, Steel and Alloy - the Perchloric Acid Dehydration Gravimetric Method for the Determination of Silicon Content
GB/T 223.63 Methods for Chemical Analysis of Iron, Steel and Alloy - the Sodium(Potassium) Periodate Photometric Method for the Determination of Manganese Content
GB/T 223.68 Methods for Chemical Analysis of Iron, Steel and Alloy - The Potassium Iodate Titration Method after Combustion in the Pipe Furnace for the Determination of Sulfur Content
GB/T 223.69 Iron, Steel and Alloy-Determination of Carbon Contents - Gas-volumetric Method after Combustion in the Pipe Furnace
GB/T 226 Etch Test for Macrostructure and Defect of Steels
GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of Test at Room Temperature
GB/T 228.2 Metallic Materials - Tensile Testing - Part 2: Method of Test at Elevated Temperature
GB/T 229 Metallic Materials - Charpy Pendulum Impact Test Method
GB/T 231.1 Metallic Materials - Brinell Hardness Test - Part 1: Test Method
GB/T 241 Metal Materials Tubes - Hydrostatic Pressure Test
GB 713 Steel Plates for Boilers and Pressure Vessels
GB/T 2102 Acceptance, Packing, Marking and Quality Certification of Steel Pipe
GB/T 2650 Method of Impact Test on Welded Joints
GB/T 2651 Method of Tensile Test for Welded Joint
GB/T 2653 Method of Bend and Compression Test for Welded Joint
GB/T 2975 Steel and Steel Products - Location and Preparation of Test Pieces for Mechanical Testing
GB/T 4336 Carbon and Low-Alloy Steel - Determination of Multi-Element Contents - Spark Discharge Atomic Emission Spectrometric Method (Routine Method)
GB/T 20066 Steel and Iron - Sampling and Preparation of Samples for the Determination of Chemical Composition
GB/T 20123 Steel and Iron - Determination of Total Carbon and Sulfur Content Infrared Absorption Method after Combustion in an Induction Furnace (Routine Method)
GB/T 21835 Dimensions and Masses per Unit Length of Welded Steel Pipes
SY/T 6423.1 Petroleum and Natural Gas Industries - Non-Destructive Testing (NDT) Methods of Steel Tubes - Part1. Radiographic Testing of Weld Seam of Welded Steel Tubes for Detection of Imperfections
SY/T 6423.2 Petroleum and Natural Gas Industries - Non-Destructive Testing (NDT) Methods of Steel Tubes - Part2. Automated Ultrasonic Testing of the Weld Seam of Welded Steel Tubes for the Detection of Longitudinal and/or Transverse Imperfections
SY/T 6423.4 Petroleum and Natural Gas Industries - Non-Destructive Testing(NDT)
Methods of Steel Tubes - Part4. Automated Ultrasonic Testing of Seamless and Welded Steel Tubes for the Detection of Laminar Imperfections
SY/T 6423.5 Petroleum and Natural Gas Industries - Non-Destructive Testing (NDT) Methods of Steel Tubes - Part 5: Digital Radiographic Testing of the Weld Seam of Welded Steel Tubes for the Detection of Imperfections
3 Terms and Definitions
The following terms and definitions are applicable to this document.
3.1 Jointer
The steel pipe formed through the butt welding of multiple (two and above) steel pipes.
6 Technical Requirements
6.1 Steel grades and chemical compositions
The steel grades and chemical compositions (melting analysis and finished product analysis) shall conform to the provisions of Table 3. According to the demand of the purchaser, through the negotiation between purchaser and supplier, the steel pipe with grade beyond the provisions of Table 3 can be supplied.
6.2 Manufacturing method
6.2.1 Raw materials
The raw materials used for manufacturing the steel pipe shall conform to the following provisions.
a) The steel shall be smelted by the oxygen converter or electric furnace; and shall be the fine-grained killed steel through the out-of-furnace melting;
b) The steel plate shall conform to the provisions of GB713, or the quality requirements shall be no less than the provisions of GB 713;
c) Any lubricant, oil stain and the like contaminating the welding groove or surrounding area shall be cleaned before welding.
6.2.2 Manufacturing processes
The steel pipe shall be manufactured by the longitudinal double submerged arc welding (SAWL) method. tempering temperature 700°C~750°C; normalizing temperature 900°C~960°C; tempering temperature 700°C~750°C, but shall be sharp quenching after normalizing 10 12Cr5Mo 650~760 1. Complete annealing or isothermal annealing;
930°C~980°C; tempering temperature 730°C~770°C.
6.4 Tensile properties
6.4.1 The tensile properties of steel pipe at room temperature shall conform to the provisions of Table 5.
6.4.2 The steel pipe base metal tensile specimen shall be cut horizontally from the position about 180° from the welding line.
6.4.3 The welded joint tensile specimen shall be cut from the steel pipe perpendicular to the welding line; and the welding line shall be at the center of the specimen; the weld reinforcement of specimen shall be eliminated, and its value shall be no less than the lower limit of tensile strength specified in Table 5. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 223.3Iron, steel and alloy - Determination of phosphorus content - Spectrophotometric method, titrimetric method and gravimetric method
- GB/T 223.11Iron, steel and alloy - Determination of chromium content - Titrimetric method and spectrophotometric method
- GB/T 223.14Methods for chemical analysis of iron, steel and alloy. The N-benzoyl-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
- GB/T 223.17Methods for chemical analysis of iron, steel and alloy - The diantipyrylmethane photometric method for the determination of titanium content
- GB/T 223.18Methods for chemical analysis of iron, steel and alloy--The sodium thiosulfate separation iodimetric method for the determination of copper content
- GB/T 223.23Iron, steel and alloy—Determination of nickel content—Spectrophotometric method and gravimetric method
GB/T 223.10 · GB 713 · SY/T 6423.1 · SY/T 6423.2
Similar standards
How to Download GB/T 32970-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 20066-2006 — Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
GB/T 20123-2006 — Steel and iron -- Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method)
GB/T 2102-2022 — Acceptance, packaging, marking and quality certification for steel tubular products
Secure payment via Stripe
Payments accepted
GB/T 32970-2016
$210.00