GB/T 32462-2015Determination of the migration of antimony in polyester resin and products - Atomic fluorescence spectrophotometer (English PDF)
聚酯树脂及其成型品中锑迁移量的测定 原子荧光光度法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32462-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2015
Implementation date
July 1, 2016
Scope
GB/T 32462-2015 is the English-translated version of 聚酯树脂及其成型品中锑迁移量的测定 原子荧光光度法.
GB/T 32462-2015 is the Chinese standard "Determination of the migration of antimony in polyester resin and products - Atomic fluorescence spectrophotometer".
Its scope clause reads: This standard specifies the use of atomic fluorescence spectrophotometric determination of polyester (polyethylene terephthalate) resin and its molybdenum migration Methods.
This standard applies to the determination of the amount of antimony in the thermoplastic polyester (polyethylene terephthalate) resin and its molded articles. Its clauses include normative reference documents; principle; reagent.
Found what you need?
Document preview — GB/T 32462-2015
National Standard of the People's Republic of China
- ICS
- 83.140.01
- Classification
- G 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 4 Reagent
- 5 instrument
- 6 Instrument Condition
- 7 Analysis Step
- 9 detection limit
- 10 precision
1 Scope
This standard specifies the use of atomic fluorescence spectrophotometric determination of polyester (polyethylene terephthalate) resin and its molybdenum migration
Methods.
This standard applies to the determination of the amount of antimony in the thermoplastic polyester (polyethylene terephthalate) resin and its molded articles.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
General rules for immersion test of packaging materials and their products for foodstuffs GB/T 5009.156
GB/T 6682 Analytical laboratory water specifications and test methods
3 principle
Sb5 in the sample soaking solution is pre-reduced to Sb3 by thiourea-ascorbic acid mixed solution and then treated in a hydride generator by potassium borohydride
And the conversion of antimony was determined by atomic fluorescence spectrometry.
4 reagent
Unless otherwise stated, the reagents used are analytical grade and water is the tertiary water specified in GB/T 6682.
4.1 hydrochloric acid solution (1 49)
excellent grade pure.
4.2
Sodium hydroxide.
4.3
Potassium borohydride.
4.4 potassium borohydride solution
first weighed 0.5g sodium hydroxide (see 4.2) in a small amount of ionized water, to be completely dissolved and then add 1.0g borohydride
Potassium (see 4.3), dissolved to 100mL. Now with the current use.
4.5
thiourea.
4.6
ascorbic acid.
4.7 thiourea - ascorbic acid solution
5g thiourea (see 4.5), 5g ascorbic acid (see 4.6), dissolved in water to 100mL,
Now with the current use.
4.8
acetic acid (glacial acetic acid).
4.9 Acetic acid solution (4%)
Take 4mL acetic acid (see 4.8) Add 50mL of water and dilute to 100mL with water.
4.10
Antimony powder (purity 99.99%).
4.11
sulfuric acid, rho~1.84g/mL.
4.12 Antimony Standard stock solution
accurately weighed 0.5000g antimony powder (see 4.10), wet with a small amount of water, add 25mL sulfuric acid (see 4.11), slow
Slowly heated to dissolve, the solution quantitative transfer to about 500mL water filled with 1000mL volumetric flask, diluted with water to the mark, mixed uniform. This stock solution is equivalent to 0.5 mg antimony per milliliter.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32462-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32462-2015
$145.00