Valid

GB/T 32007-2015Unified coding and identification for auto parts (English PDF)

汽车零部件的统一编码与标识

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32007-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 11, 2015

Implementation date

January 1, 2016

Scope

GB/T 32007-2015 is the English-translated version of 汽车零部件的统一编码与标识.

GB/T 32007-2015 is the Chinese standard "Unified coding and identification for auto parts". Its scope clause reads: This Standard specifies the coding principles, data structures, notation methods, and its general position rules of the unified coding (hereinafter referred to as "coding") for auto parts.

This Standard is applicable to the preparation of the unified coding and identification for auto parts; it is used for information acquisition and data exchange for auto parts.

Its clauses include terms and definitions; coding; symbols; symbol's position. It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on SEPTEMBER 11, 2015 and took effect on JANUARY 1, 2016.

Found what you need?

Document preview — GB/T 32007-2015

National Standard of the People's Republic of China

ICS: 35.040
Classification: A 24

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword3
1 Scope4
2 Normative References4
3 Terms and Definitions5
4 Coding6
5 Symbols7
6 Symbol's Position8

Foreword

This Standard was drafted as per the rules specified in GB/T 1.1-2009.

1 Scope

This Standard specifies the coding principles, data structures, notation methods, and its general position rules of the unified coding (hereinafter referred to as "coding") for auto parts.

This Standard is applicable to the preparation of the unified coding and identification for auto parts; it is used for information acquisition and data exchange for auto parts.

2 Normative References

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this standard.

GB/T 12905 Bar Coding Terminology

GB/T 14258 Information Technology - Automatic Identification and Data Capture Techniques - Verification of Print Quality of Bar Code Symbols

GB/T 15425-2014 Bar Code for Commodity - 128 Bar Code

GB/T 16986-2009 Bar Code for Commodity - Application Identifier

GB/T 18284 QR Code

GB/T 21049 Chinese-Sensible Code

GB/T 23704 Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Print Quality Test Specification - Two-Dimensional Symbols

ISO/IEC 16022 Information Technology - Automatic Identification and Data Capture Techniques - Data Matrix Bar Code Symbology Specification ISO/IEC TR 29158 Information Technology - Automatic Identification and Data Capture Techniques - Direct Part Mark (DPM) Quality Guideline

3 Terms and Definitions

The following terms and definitions defined in GB/T 12905 are applicable to this document.

3.1 Global Trade Item Number (GTIN)

Application identifier 01 consists of 14 digits, which is globally unique identification code for trade items (including products and services).

3.2 Parts number

Auto parts manufacturers make the physical numbers against their manufactured parts, which also includes the management numbers determined due to the technology, manufacture and management demands of the manufacturers, the application identifier is 240.

3.3 Parts lot

Code of parts of the belonged batch, application identifier is 10, which is expressed by a group of digits, letters or combinations.

3.4 Part serial number

Uniquely identify the running number of single-piece of certain kind of parts in the same batch, application identifier is 21, which is expressed by a group of digits, letters, and combination of digits.

3.5 Supply code in customer plant

Customer distributes the internal vendor code to the supplier, application identifier is 92, which is expressed by a group of digits or letters.

3.6 Spare parts code in customer plant

Customer provides the spare parts codes for the products supplied by the supplier, application identifier is 241, which is expressed by a group of digits or letters.

3.7 Customer purchase code

Parts purchasing order code, application identifier is 400, which is expressed by a group of digits or letters.

3.8 Direct Part Mark (DPM)

A preparation technology marked directly on the part surface; it does not require marking carriers such as paper or label, which is also called body identification. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

ISO/IEC 16022

Cited by

Similar standards

GB/T 18805-2026|GB/T 32915-2026|GB/T 42382.2-2026|GB/T 42382.3-2026|GB/T 47277-2026|GB/T 47312-2026

How to Download GB/T 32007-2015

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.