GB/T 31301.3-2015Footwear manufacturing machines—Safety require—Part 3: Grinding and polishing machines (English PDF)

1 Scope

This section GB/T 31301 specifies the safety requirements for the design, construction and use of the sand grinder and polishing machine aspects. This section contains

The operator is expected to use the machine and foreseeable misuse arising from all the major risks associated with sanding, polishing machine related to hazardous situations and crises

Insurance event (see Appendix A).

This section applies to the footwear industry for materials processing machines, namely. sand grinder (including coarse grinding, fine grinding) and polishing machine.

This section does not apply to modular shoe repair machine.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 3766-2001 Hydraulic System General technical conditions

GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements

GB/T 7932-2003 General technical conditions of pneumatic systems

GB/T 8196-2003 mechanical safety devices fixed and movable guards General requirements for the design and manufacture

GB 14048.4-2010 Low-voltage switchgear and control equipment - Part 4-1. Contactors and motor starters electromechanical contact

Contactors and motor starters (with motor protection)

GB 14048.5-2008 Low-voltage switchgear and control equipment Part 5-1. Control circuit devices and switching element Electromechanical control

Electrical circuit

GB/T 15706-2012 Safety of machinery - General principles for design risk assessment and risk reduced

GB 16754-2008 Safety of machinery - Emergency stop design principles

GB/T 16855.1-2008 Safety of machinery - Safety-related control system components - Part 1. General principles for design

GB 18209.1-2000 Electrical safety of machinery - Indication, marking and actuation - Part 1. Requirements for visual, auditory and tactile signals

Claim

GB/T 18569.1-2001 Safety of machinery decreased from hazardous substances emitted by machinery health risk - Part 1. for

Machinery manufacturers principles and norms

GB/T 18717.1-2002 for the safety of machinery - Ergonomic design - Part 1. body into the correct mechanical opening size

With principles

Ergonomic design - Part 2 GB/T 18717.2-2002 for the safety of machinery. body into mechanical foot opening

Inch determining principle

Device design and selection principles interlock GB/T 18831-2010 mechanical belt guards

GB/T 19436.1-2004 electric machinery electrical safety sensitive protective equipment - Part 1. General requirements and tests

GB/T 19436.2-2004 Safety of machinery - Electrical power sensitive protective equipment - Part 2. using active optoelectronic protective devices

Particular requirements (AOPDs) equipment

GB/T 19670-2005 Safety of machinery - Prevention of unexpected start

GB/T 19671-2005 Safety of machinery - hands control devices - Functional aspects and design principles […]