GB/T 31295-2014The core to wind turbine blade—Determination of dimensional stability at elevated temperatures with flexural load and with compressive load (English PDF)
风电叶片用芯材 弯曲载荷和压缩载荷下高温尺寸稳定性的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31295-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 5, 2014
Implementation date
October 1, 2015
Scope
GB/T 31295-2014 is the English-translated version of 风电叶片用芯材 弯曲载荷和压缩载荷下高温尺寸稳定性的测定.
GB/T 31295-2014 is the Chinese standard "The core to wind turbine blade—Determination of dimensional stability at elevated temperatures with flexural load and with compressive load".
Its scope clause reads: This standard specifies the test methods for high temperature dimensional stability of the material in bending and compression loads.
This standard applies to the manufacture of wind turbine blades core material, such as cross-linked PVC rigid foam, high strength XPS foam, other rigid foam You can also refer to the use of materials.
NOTE. The test value of the material depends on the test method used, and therefore, bending and compression load value at high temperature dimensional stability of the material may be different, in addition, it It can be applied directly to the test methods are consistent with the Standard Conditions.
There are two test methods which by supply and demand in a particular occasion Both parties, or specified in the relevant standard. Its clauses include terms and definitions; high temperature dimensional stability under bending load.
Found what you need?
Document preview — GB/T 31295-2014
National Standard of the People's Republic of China
- ICS
- 59.100.99
- Classification
- Q 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Terms and definitions
- 2.1 High temperature dimensional stability under bending load
- 3 high temperature dimensional stability under bending load
- 3.1 Sample
1 Scope
This standard specifies the test methods for high temperature dimensional stability of the material in bending and compression loads.
This standard applies to the manufacture of wind turbine blades core material, such as cross-linked PVC rigid foam, high strength XPS foam, other rigid foam
You can also refer to the use of materials.
NOTE. The test value of the material depends on the test method used, and therefore, bending and compression load value at high temperature dimensional stability of the material may be different, in addition, it
It can be applied directly to the test methods are consistent with the Standard Conditions. There are two test methods which by supply and demand in a particular occasion
Both parties, or specified in the relevant standard.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 High temperature dimensional stability under bending load
Materials under certain bending load is uniformly heated to a predetermined temperature from room during deformation.
2.2 Dimensionalstabilityatelevatedtemperatureswithcompressiveload compressed high temperature dimensional stability under load
Material under a certain compression load is uniformly heated from room temperature to the deformation of a predetermined time.
3 high temperature dimensional stability under bending load
3.1 Sample
3.1.1
size (length × width × thickness) of (150 ± 2) mm × (20 ± 0.5) rectangular sample mm × (20 ± 0.5) mm in. Samples should be three
Depicting mutually perpendicular directions on a group of specimens, taking a total of three groups of take three, well marked, labeled direction of the sample shown in Figure 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31295-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31295-2014
$145.00