Valid

GB/T 31294-2014The core to wind turbine blade—Test method for facing cleavage of sandwich panels (English PDF)

风电叶片用芯材 夹芯板面层剥离强度的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31294-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 5, 2014

Implementation date

October 1, 2015

Scope

GB/T 31294-2014 is the English-translated version of 风电叶片用芯材 夹芯板面层剥离强度的测定.

GB/T 31294-2014 is the Chinese standard "The core to wind turbine blade—Test method for facing cleavage of sandwich panels". Its scope clause reads: This standard specifies the test method for peel strength of the sheet surface layer sandwich structure.

This standard applies to fiber-reinforced plastic sheet for the surface layer of rigid, rigid-foam core sandwich plate structure, others such as aluminum, steel And other rigid board for the sandwich structure of the surface layer, or plate sandwich structures other core materials may also refer to adopt.

Note 1. This standard compared with GB/T 1457-2005, which applies only to the flexible panel. Note 2.

If the sandwich panel bending stiffness (EI) is greater than 3.09kN · mm2/mm width, that is about the glass plate thickness greater than 1.18mm, the thickness of aluminum Greater than 0.81mm, plate thickness greater than 0.57mm, more according to the standard test method for effect. Its clauses include terms and definitions; test equipment.

Found what you need?

Document preview — GB/T 31294-2014

National Standard of the People's Republic of China

ICS
59.100.99
Classification
Q 23

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Terms and definitions
  • 2.1 Adhesive Failure
  • 2.2 Adhesive failure bondfailure
  • 2.3 Core failure
  • 2.4 Failure mixed
  • 3 Test Equipment
  • 3.1 Testing Machine

1 Scope

This standard specifies the test method for peel strength of the sheet surface layer sandwich structure.

This standard applies to fiber-reinforced plastic sheet for the surface layer of rigid, rigid-foam core sandwich plate structure, others such as aluminum, steel

And other rigid board for the sandwich structure of the surface layer, or plate sandwich structures other core materials may also refer to adopt.

Note 1. This standard compared with GB/T 1457-2005, which applies only to the flexible panel.

Note 2. If the sandwich panel bending stiffness (EI) is greater than 3.09kN · mm2/mm width, that is about the glass plate thickness greater than 1.18mm, the thickness of aluminum

Greater than 0.81mm, plate thickness greater than 0.57mm, more according to the standard test method for effect.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 Adhesive Failure

Destruction takes place entirely within the adhesive layer. Sandwich between the core and the adhesive, there is no separation between the adhesive and the surface layer, the core layer inside

No tearing or cracking phenomenon.

2.2 Adhesive failure bondfailure

Interfacial failure, namely between the adhesive and the core between (a) or adhesive and the surface layer (b) destruction; sandwiching no tearing or cracking

Phenomenon, and no adhesive failure phenomenon.

2.3 Core failure

Destruction takes place entirely inside the core, the core layer tearing or cracking. Between the core and the adhesive, the adhesive inside the adhesive and the surface layer

Between no damage.

2.4 Failure mixed

In adhesive failure, failure of the core material and adhesive failure mode of failure of the three, two or more failure modes simultaneously.

3 Test Equipment

3.1 Testing Machine

Should be constant elongation type testing machine crosshead displacement speed should meet 25mm/min ± 1mm / min. Indicating and recording can be applied

Crosshead displacement and the corresponding load on the sample, the value of the load is shown accuracy of at least ± 1%, showing the value of the displacement accuracy of at least ± 1%.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 31294-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31294-2014

$135.00