GB/T 31254-2014Safety of machinery—Safety specification for the design of fixed ladders (English PDF)
机械安全 固定式直梯的安全设计规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31254-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 5, 2014
Implementation date
July 1, 2015
Scope
GB/T 31254-2014 is the English-translated version of 机械安全 固定式直梯的安全设计规范.
GB/T 31254-2014 is the Chinese standard "Safety of machinery—Safety specification for the design of fixed ladders". Its scope clause reads: This standard specifies technical conditions for the safety of fixed ladders and relevant platform, safety cage, safety door, etc. related to safe use.
This standard is applicable to fixed ladders used as fixed facilities for entering into the machinery. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 31254-2014
National Standard of the People's Republic of China
- Classification
- J 09
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword I
- Introduction II
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Material
- 5 Performance Requirements
- 6 Safety Door
- 7 Safety Requirements Verification
1 Scope
This standard specifies technical conditions for the safety of fixed ladders and relevant platform, safety cage, safety door, etc. related to safe use.
This standard is applicable to fixed ladders used as fixed facilities for entering into the machinery.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 8013.1-2007 Anodic Oxide Coatings and Organic Polymer Coatings on Aluminium and its Alloys - Part 1: Anodic Oxide Coatings
GB/T 12467 (All Parts) Quality Requirements for Fusion Welding of Metallic Materials
GB/T 13912 Metallic Coatings - Hot Dip Galvanized Coatings on Fabricated Iron and Steel Articles - Specifications and Test Methods
GB/T 15706-2012 Safety of Machinery - General Principles for Design - Risk Assessment and Risk Reduction
GB 17888.2 Safety of Machinery - Permanent Means of Access to Machinery - Part 2: Working Platforms and Walkways
GB 17888.3-2008 Safety of Machinery - Permanent Means of Access to Machines and Industrial Plants - Part 3: Stairways, Stepladders and Guard-rail
GB 17888.4-2008 Safety of Machinery - Permanent Means of Access to Machinery - Part 4: Fixed Ladders
GB/T 17889.2 Ladders - Part 2: Requirements, Test, Marking
GB/T 19355 Protection Against Corrosion of Iron and Steel in Structures - Zinc and Aluminum Coatings - Guidelines
GB/T 22086 Recommendations for Welding of Aluminium and Aluminium Alloys
GB 24537-2009 Personal Fall Protection Equipment - Guided Type Fall Arrester Including a Flexible Anchor Line
GB 24542-2009 Personal Fall Protection Equipment - Guided Type Fall Arrester Including a Rigid Anchor Line
GB 24544-2009 Personal Fall Protection Equipment - Retractable Type Fall Arrester
GB/T 31255-2014 Safety of Machinery - Safety Specification for the Design of Industrial Type Stairs, Working Platforms and Walkways
ISO 12944 (All Parts) Paints and Varnishes Corrosion Protection of Steel Structures by Protective Paint Systems
3 Terms and Definitions
For the purpose of this standard, terms and definitions defined in GB/T 15706-2012 and GB 17888.4-2008 as well as the following ones apply.
3.1 Safety cage
A kind of combined type frame restricting the falling risk of personnel from straight stairs, see Figures 1, 2, 3 and 4.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31254-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31254-2014
$155.00