GB/T 31237-2014Inspection specification for 1000kV power system protection relay and automation device (English PDF)
1000kV系统继电保护装置及安全自动装置检测技术规范
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31237-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 30, 2014
Implementation date
April 1, 2015
Scope
GB/T 31237-2014 is the English-translated version of 1000kV系统继电保护装置及安全自动装置检测技术规范.
GB/T 31237-2014 is the Chinese standard "Inspection specification for 1000kV power system protection relay and automation device".
Its scope clause reads: This standard specifies the technical conditions 1000kV detecting power system protection devices and automatic safety devices, testing projects, technology Requirements, test methods and the method of determining the test results.
This standard applies to the basic method of power system protection testing department and the development department should be followed in carrying out type tests.
Found what you need?
Document preview — GB/T 31237-2014
National Standard of the People's Republic of China
- ICS
- 29.240.10
- Classification
- K 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions2
- 4 detects the condition2
- 5 structure and appearance inspection2
- 6 Power consumption test3
- 7 Environmental Test3
- 8 Power Effect Test4
- 9 mechanical performance test4
- 10 Insulation Test5
- 11 Electromagnetic compatibility6
- 12 overload test9
- 13 measuring element accuracy and functionality means9
- Appendix A (normative appendix) 1000kV model test model typical wiring and parameter15
1 Scope
This standard specifies the technical conditions 1000kV detecting power system protection devices and automatic safety devices, testing projects, technology
Requirements, test methods and the method of determining the test results.
This standard applies to the basic method of power system protection testing department and the development department should be followed in carrying out type tests.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2422 electric and electronic products environmental testing terminology
GB/T 2900.1 Electrotechnical Basic terminology
GB/T 2900.17 Electrotechnical terminology of electrical relays
GB/T 2900.49 Electrotechnical terminology - Power System Protection
GB/T 4365-2003 Electrotechnical terminology Electromagnetic Compatibility
Basic testing method GB/T 7261-2008 and relay protection devices
GB/T 7268-2005 secondary circuit of power system control and protection devices with plug and plug-in panel box basic size series
GB/T 11287-2000 Electrical relays - Part 21. Measuring relays and protection equipment vibration, shock, bump and seismic
Tests a vibration test (sinusoidal)
GB/T 14537-1993 and measure impact crash tests relays and protection equipment
GB/T 14598.3-2006 Electrical relays - Part 5. Measuring relays and protection equipment insulation coordination requirements and tests
GB/T 14598.9-2010 metric Part 22-3 relays and protection equipment. Electrical disturbance tests --- radiated electromagnetic field disturbance test
GB/T 14598.10-2012 Electrical relays - Part 22-4. Electrical disturbance tests - Electrical fast transient/burst immunity test
GB/T 14598.13-2008 Electrical relays - Part 22-1. Electrical disturbance test for measuring relays and protection equipment
Mortem 1MHz burst immunity test
GB/T 14598.14-2010 metric Part 22-2 relays and protection equipment. Electrical disturbance tests - Electrostatic discharge tests ---
GB/T 14598.16-2002 Electrical relays - Part 25. Electrical relays for measuring relays and protection equipment electromagnetic emissions test
GB/T 14598.17-2005 Electrical relays - Part 22-6. Electrical relays and protection equipment disturbance tests ---
RF field induced immunity to conducted disturbances
GB/T 14598.18-2012 measuring relays and protection equipment - Part 22-5. Electrical disturbance tests - Surge immunity test
GB/T 14598.19-2007 Electrical relays - Part 22-7. Electrical measuring relays and protection equipment disturbance tests ---
Power frequency immunity tests
GB/T 14598.20-2007 Electrical relays - Part 26. Electromagnetic compatibility requirements for measuring relays and protection equipment
GB 14598.27-2008 metric Part 27 relays and protection equipment. Product safety requirements […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31237-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 31237-2014
$295.00