GB/T 31202-2014Agricultural and forestry machinery and garden machinery—Pedestrian controlled and hand-held machines—Determination of accessibility of hot surfaces (English PDF)
农业和林业机械及园林机械 手扶控制和手持控制机械 灼热表面可触及性的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31202-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 3, 2014
Implementation date
March 1, 2015
Scope
GB/T 31202-2014 is the English-translated version of 农业和林业机械及园林机械 手扶控制和手持控制机械 灼热表面可触及性的测定.
GB/T 31202-2014 is the Chinese standard "Agricultural and forestry machinery and garden machinery—Pedestrian controlled and hand-held machines—Determination of accessibility of hot surfaces".
Its scope clause reads: This standard specifies requirements for the determination of anti-touch protection structure of agricultural machinery, forestry machinery and garden machinery in the hot surfaces meets method.
This standard applies to the internal combustion engine-powered handheld control or hand-held control (or bear pendant power) of agricultural machinery, forestry machinery and Garden machinery. Its clauses include terms and definitions; guidelines.
Found what you need?
Document preview — GB/T 31202-2014
National Standard of the People's Republic of China
- ICS
- 65.060.80
- Classification
- B 95
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Guidelines
1 Scope
This standard specifies requirements for the determination of anti-touch protection structure of agricultural machinery, forestry machinery and garden machinery in the hot surfaces meets method.
This standard applies to the internal combustion engine-powered handheld control or hand-held control (or bear pendant power) of agricultural machinery, forestry machinery and
Garden machinery.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 15706 Safety of machinery - General principles for design risk assessment and risk reduced
ISO 13732-1. Ergonomics evaluation methods and surface thermal environment upon contact 2006 people's reactions - Part 1. Hot table
Surface (Ergonomicsofthethermalenvironment-Methodsfortheassessmentofhumanresponsestocon- tactwithsurfaces-Part 1. Hotsurfaces)
3 Terms and Definitions
GB/T 15706, ISO 13732-1.2006 and defined the following terms and definitions apply to this document.
NOTE. If a dedicated product standard types of machinery in the corresponding terms and definitions will be given priority in the product standard definition.
3.1 General operation
Machine for basic operations, such as start, stop, refueling, connect (or disconnect) power supply and the procedure ends the job.
3.2 Accessible surfaces
The operator in regular operation, may touch the surface of the machine.
3.3 Hot surfaces hotsurface
Temperature at or above the surface area of standard products specified value.
4 Guidelines
This standard cone test to determine whether the use of hot surfaces can be touched.
Inadvertently accessible surface area may be larger than 10cm2, and the surface temperature may exceed the allowable values should be measured.
Determination of flow in Appendix A.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- LY/T 1618-2022Backpack type wind sweeper powered by gasoline engine
- LY/T 1668-2022Portable collection, crushing and sweeping machine powered by gasoline engine
- LY/T 3307-2022Hand-push mowing and scarifying machine powered by gasoline engine
- LY/T 3237-2020Forestry machinery - Internal combustion engine powered semi-trailed branch chippers
- LY/T 1719-2017Forestry machinery. Portable fire extinguishers with pneumatic and water spray
- LY/T 2887-2017Forestry machinery--Gasoline engine powered pole-mounted picking machines with axial vibration hook
Similar standards
How to Download GB/T 31202-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31202-2014
$145.00