Valid

GB/T 31201-2014Complex fertilizer (slow control release) production complete equipment (English PDF)

复合肥（缓控释）生产成套设备

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31201-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 3, 2014

Implementation date

March 1, 2015

Scope

GB/T 31201-2014 is the English-translated version of 复合肥（缓控释）生产成套设备.

GB/T 31201-2014 is the Chinese national standard for the complete plant that produces compound fertiliser, including slow and controlled release types.

It gives the terms and definitions, the models of plant covered, the requirements - capacity, product quality the line must be able to hold, safety, energy consumption and environmental protection - the test methods, the inspection rules and the provisions on marking, packaging, transport and storage.

It applies to complete plants using drum granulation or spray granulation. Fertiliser producers and plant builders use it. Issued on 3 September 2014, it has applied since 1 March 2015.

Found what you need?

Document preview — GB/T 31201-2014

National Standard of the People's Republic of China

ICS: 71.120.10; 75.180.20; 23.020.30
Classification: G 93

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and definitions
4 Model
5 Requirement
5.1 General Technical Requirements
5.2 sets requirements
5.3 Installation Requirements
5.4 Safety Requirements
5.5 Performance Indicators
6 4 Installation and commissioning acceptance
4
6.1 Installation and acceptance
6.2 stand-alone, no-load test acceptance linkage
6.3 Operational Acceptance load
7 Test Method
7.1 Determination of the production capacity of
7.2 Determination of the particle size sieving ---
7.3 Moisture
7.4 Determination of dust
7.5 Noise measurement
7.6 tons of fertilizer consumption measured
8 6 Inspection Rules
8.1 Batch
8.2 Sample
8.3 Inspection
8.4 Identification and retest
8.5 Test Report
9 signs, packaging, transportation and storage
9.1 mark
9.2 Packaging
9.3 Transport
9.4 Storage

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

The standard proposed by China Petroleum and Chemical Industry Association.

1 Scope

This standard specifies the fertilizer (slow release) production equipment of terms and definitions, models, requirements, test methods, inspection rules, marking, Packaging, transport and storage.

This standard applies to drum granulation, spray granulation production of compound fertilizer (slow release) of complete sets of equipment.

This standard does not apply to the production of compound fertilizer tower granulation method (slow release) of complete sets of equipment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 2440 urea

GB 2894 Safety Signs and use guidelines

GB/T 3797-2005 Electric Control Equipment

GB/T 6003.1 Test sieves - Technical requirements and testing - Part 1. Test sieves of metal wire cloth

GB 6549 potassium chloride

GB/T 8170-2008 revised value represents about rules and limit values and judgment

GB 8569 solid chemical fertilizers Packaging

GB/T 9969 General Instructions industrial products

GB/T 13306 signs

GB/T 13384 mechanical and electrical products packaging General technical conditions

GB 15063 compound fertilizers (compound fertilizer)

Device design and selection principles interlock GB/T 18831 mechanical belt guards

GB 20413 superphosphate

GB/T 23348 slow release fertilizer

GB 50231 mechanical equipment installation construction and acceptance of universal norms

GB 50235 industrial metal pipeline construction norms

GB 50236 field equipment, industrial pipe welding engineering for construction

GB 50254 electrical low-voltage electrical equipment installation engineering construction and acceptance GB Z/T 192.1 Determination of dust in the air of workplace Part 1. The total dust concentration SH3022 petrochemical equipment and pipeline corrosion coating Technical Specification

WS/T 69 for measurement of workplace noise

3 Terms and Definitions

The following terms and definitions apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Referenced standards

Normative references

GB 2440 · GB 15063 · GB 20413 · GB 50254 · WS/T 69

Similar standards

GB/T 42601.1-2023|GB/T 42601.3-2023|GB/T 17389-2026|GB/T 29169-2026|GB/T 47273-2026|GB/T 47376-2026

How to Download GB/T 31201-2014

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.