GB/T 31105-2014Biaxially oriented polypropylene both sides coated film with diversified coating materials (English PDF)
涂布不同涂料的双向拉伸聚丙烯双面涂布膜
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31105-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 3, 2014
Implementation date
August 1, 2015
Scope
GB/T 31105-2014 is the English-translated version of 涂布不同涂料的双向拉伸聚丙烯双面涂布膜.
GB/T 31105-2014 is the Chinese standard "Biaxially oriented polypropylene both sides coated film with diversified coating materials".
Its scope clause reads: This standard specifies the polyvinylidene chloride (PVDC), acrylic acid (AC), modified polyvinyl alcohol (PVOH) coating with each other in a two-way The base film obtained coating film (referred to as the double-coated BOPP film) classification of oriented polypropylene (BOPP), requirements, test methods, inspection regulations Then, signs, packaging, transport and storage.
This standard applies to the transparent biaxially oriented polypropylene film or foamed white biaxially oriented polypropylene film as a base film, coated on one side prop Acid (AC), the other surface coated with polyvinylidene chloride (PVDC) or a modified polyvinyl alcohol (PVOH) one-sided and the obtained BOPP Coated films.
This standard does not apply to double-coated biaxially oriented polypropylene film is directly in contact with food coated with different coatings. Its clauses include categories and specifications.
Found what you need?
Document preview — GB/T 31105-2014
National Standard of the People's Republic of China
- ICS
- 83.140.01
- Classification
- Y 28
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Categories and specifications
- 3.1 Classification
1 Scope
This standard specifies the polyvinylidene chloride (PVDC), acrylic acid (AC), modified polyvinyl alcohol (PVOH) coating with each other in a two-way
The base film obtained coating film (referred to as the double-coated BOPP film) classification of oriented polypropylene (BOPP), requirements, test methods, inspection regulations
Then, signs, packaging, transport and storage.
This standard applies to the transparent biaxially oriented polypropylene film or foamed white biaxially oriented polypropylene film as a base film, coated on one side prop
Acid (AC), the other surface coated with polyvinylidene chloride (PVDC) or a modified polyvinyl alcohol (PVOH) one-sided and the obtained BOPP Coated films.
This standard does not apply to double-coated biaxially oriented polypropylene film is directly in contact with food coated with different coatings.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs
Test conditions for films and sheets. plastic 1040.3-2006 Determination of tensile properties GB/T Part 3
Determination of GB/T 2410-2008 transparent plastic light transmittance and haze
GB/T 2828.1-2012 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan
GB/T 2913-1982 Test method for plastic white
GB/T 2918-1998 plastic sample conditioning and testing of the standard environment
GB/T 6672-2001 plastic film and sheeting - Determination of thickness by mechanical scanning
Determination of GB/T 6673-2001 plastic film and sheet length and width
GB/T 8807-1988 Test method for specular gloss plastic
GB/T 10006-1988 coefficient of friction of plastic film and sheeting - Determination
GB/T 14216-2008 Determination of plastic film and sheet wetting tension
GB/T 19789-2005 Packaging materials of plastic film and sheet oxygen permeability test coulomb meter assay
Transmittance measurement GB/T 21529-2008 plastic film and sheeting steam electrolysis sensor method
3 Categories and specifications
3.1 Classification
BOPP film is coated on both sides according to different substrates and coatings and PVDC barrier level is divided into seven categories (Table 1).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31105-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 31105-2014
$145.00