GB/T 30123-2013Busbar trunking systems (air insulation busbar) for wind power generation (English PDF)
风力发电导电轨(空气型母线槽)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30123-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 17, 2013
Implementation date
June 14, 2014
Scope
GB/T 30123-2013 is the English-translated version of 风力发电导电轨(空气型母线槽).
GB/T 30123-2013 is the Chinese standard "Busbar trunking systems (air insulation busbar) for wind power generation".
Its scope clause reads: This standard specifies the air wind power conductor rail system (hereinafter referred to as wind power busbar) terms and definitions, technical requirements, test side Method, inspection rules, nameplate, signs, packaging, transportation and storage.
This standard applies to the rated voltage not exceeding 1000V, frequency of 50Hz or 60Hz wind power busbar. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30123-2013
National Standard of the People's Republic of China
- ICS
- 29.130
- Classification
- K 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 2 Technical Requirements
- 4.1 Use of environmental conditions
- 4.2 Installation conditions
- 4.3 3 ratings
- 4.4 Structural requirements
- 4.5 Performance Requirements
- 5.1 Type test
- 5.2 factory inspection
- 6 Inspection Rules
- 6.1 General
- 6.2 Type tests
- 6.3 factory inspection
- 7 nameplate, signs, packaging, transportation and storage
- 7.1 Nameplate and sign
- 7.2 Packaging and transport
- 7.3 Storage conditions
1 Scope
This standard specifies the air wind power conductor rail system (hereinafter referred to as wind power busbar) terms and definitions, technical requirements, test side
Method, inspection rules, nameplate, signs, packaging, transportation and storage.
This standard applies to the rated voltage not exceeding 1000V, frequency of 50Hz or 60Hz wind power busbar.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)
GB 4208-2008 shell protection (IP code)
GB 7251.1-2005 Low-voltage switchgear and control equipment Part 1. Type - tested and partially type-tested assemblies
GB 7251.2-2006 Low-voltage switchgear and control equipment Part 2. busbar trunking systems (busways) Special
Claim
JB/T 3085 power transmission control device packaging and shipping procedures
3 Terms and Definitions
GB 7251.2-2006 defined and the following terms and definitions apply to this document.
3.1 Air wind power conductor rail airinsulationbusbartrunkingsystemsforwindpowergeneration
The busbar support with an insulating spacer in the housing by air dielectric insulation, and type-tested busbar.
3.2 Housing enclosure
Protection of equipment against certain external factors A components and equipment in all directions is not directly accessible.
3.3 Live parts livepart
In normal use for energized conductors or conductive parts, including the neutral conductor, but it does not include the protection of the neutral conductor (PEN body).
3.4 Exposed conductive parts
An electrical equipment accessible conductive member, it is usually not charged, but may be charged in case of failure.
3.5 Protective conductor protectiveconductor; PE
To prevent risk of electric shock with the following components one kind of conductor electrical connection;
--- Exposed conductive parts;
--- Outer conductive member;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30123-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30123-2013
$195.00