GB/T 30091-2013Specifications for membrane key board (English PDF)
薄膜键盘技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30091-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 17, 2013
Implementation date
May 1, 2014
Scope
GB/T 30091-2013 is the English-translated version of 薄膜键盘技术条件.
GB/T 30091-2013 is the Chinese standard "Specifications for membrane key board". Its scope clause reads: This standard specifies the terms and definitions membrane keyboard, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the switching power of less than 1W, the maximum operating voltage of 42V (DC) or 25V (AC), the maximum operating current of less than 100mA membrane keyboard.
Line carrier is a rigid substrate can refer to use. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30091-2013
National Standard of the People's Republic of China
- ICS
- 31.180
- Classification
- L 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Membrane switch
- 3.2 Film key unit (hereinafter referred to as membrane keys)
- 3.3 Film key array membranekeyarray
- 3.4 Film panel membranepanel
1 Scope
This standard specifies the terms and definitions membrane keyboard, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the switching power of less than 1W, the maximum operating voltage of 42V (DC) or 25V (AC), the maximum operating current of less than
100mA membrane keyboard. Line carrier is a rigid substrate can refer to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat
GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test
GB/T 2423.22-2012 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change
GB/T 2792-1998 180 ° pressure-sensitive adhesive tape peel strength test method
GB/T 2828.1-2012 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan
GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 5095.2-1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 2. General examination,
Electrical continuity and contact resistance tests, insulation tests and voltage stress tests
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Membrane switch
A multi-layer structure of a planar or non-locking key switch made of an insulating material and a layer of conductive material has a certain elasticity thereof.
3.2 Film key unit (hereinafter referred to as membrane keys)
Membrane keys array a key plane, which includes a resilient insulating film with a conductive pattern (switch contacts) and to maintain a certain line
Cheng element isolation layer.
3.3 Film key array membranekeyarray
A combination of two or more membrane keys, the film often indirect key array operation, as shown in Fig.
3.4 Film panel membranepanel
A method of processing an elastic film having functionality into character indicates decorative panels. Figure 2 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30091-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30091-2013
$235.00