GB/T 29347-2012Examination standard for cartridge case marks in firearms discipline of forensic science (English PDF)
法庭科学枪械射击弹壳痕迹检验规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29347-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
May 1, 2013
Scope
GB/T 29347-2012 is the English-translated version of 法庭科学枪械射击弹壳痕迹检验规范.
GB/T 29347-2012 is the Chinese standard "Examination standard for cartridge case marks in firearms discipline of forensic science".
Its scope clause reads: This standard specifies the forensic science field firearms Bullet Shooting Trace test content and requirements, sample production requirements, test methods and inspection Audit opinion expressed.
This standard applies to the field of forensic science firearms Bullet Shooting Trace inspection and appraisal. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29347-2012
National Standard of the People's Republic of China
- ICS
- 13.310
- Classification
- A 92
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Shells Trace cartridgecasemarks
- 3.2 Magazine mouth traces
- 3.3 It marks the end of the chamber surface breechfeedingmarks
- 3.4 Hit the needle traces firingpinimpressions/marks
- 3.5 Breech Marks boltrecessmarks/impressions
- 3.6 The inner wall of the chamber traces
- 3.7 Indicator rod marks
- 3.8 Pull the shell hook trace extractormarks
1 Scope
This standard specifies the forensic science field firearms Bullet Shooting Trace test content and requirements, sample production requirements, test methods and inspection
Audit opinion expressed.
This standard applies to the field of forensic science firearms Bullet Shooting Trace inspection and appraisal.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 29348-2012 forensic traces of gun shot bullet inspection code
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Shells Trace cartridgecasemarks
Loading, firing, ejection process, the relevant parts of firearms and gunpowder gas shell surface traces.
3.2 Magazine mouth traces
Loading, into the bore, the ejection process, the magazine holds bomb shell port edge traces in the body and the bottom edge of the ridge formation.
3.3 It marks the end of the chamber surface breechfeedingmarks
In the course of the bullet into the chamber, the chamber after the cuts in the mouth of the shell, the shell is formed marks.
3.4 Hit the needle traces firingpinimpressions/marks
When firing bullets hit the needle traces shell portion formed on a surface primer.
3.5 Breech Marks boltrecessmarks/impressions
When the firing and ejector, Breech traces formed in the bottom of bullets.
3.6 The inner wall of the chamber traces
When firing bullets in the chamber shell formed on the surface traces.
3.7 Indicator rod marks
And shot bullets into the breech when issued, indicating traces of the club head formed on the bottom shell.
3.8 Pull the shell hook trace extractormarks
Bullets and shell casings into the bore to hold the gun was thrown outside the process, pull hook trace shell casings in the bottom edge, edge, and other parts of the bottom groove is formed.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 29347-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29347-2012
$105.00