GB/T 29344-2023Technical specifications for the harvesting and processing of ganoderma spore powder (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

This document stipulates technical requirements related to food quality. Food safety-related requirements can be found in relevant laws, regulations, policies and food safety standards. document.

This document replaces GB/T 29344-2012 "Technical Specifications for Harvesting and Processing of Ganoderma Spore Powder". Compared with GB/T 29344-2012, In addition to structural adjustments and editorial changes, the main technical changes are as follows.

--- Added "Provisions on the content of Ganoderma lucidum spore polysaccharide" (see 4.1.5);

---Changed the "harvesting conditions" (see 4.2.1, 4.2.1 of the 2012 version);

---Changed "sleeve powder collection" (see 4.3.1, 2012 version of 4.3.1);

---Changed "fan adsorption powder collection" (see 4.3.2, 2012 version of 4.3.2);

---Changed "Powder mining under plastic film covering" (see 4.3.3, 4.3.3 in the 2012 version);

---Changed the "workshop cleanliness requirements" (see 5.2.4, 6.4 of the 2012 version);

---Added "drying" requirements (see 5.3.1);

---Changed "screening and impurity removal" (see 5.3.2, 7.1 of the 2012 version);

---Changed the "sterilization" method (see 5.3.3, 7.2 of the 2012 version);

---Changed the "wall breaking" processing method (see 5.3.5, 7.4 of the 2012 edition);

---Added "Quality Management" (see Chapter 7);

---Changed the sample preparation of the wall breaking rate determination method (see B.4, B.5.1, A.4, A.5.1 of the 2012 version).

1 Scope

This document specifies the technical requirements for harvesting and processing of Ganoderma spore powder. Harvesting and processing of Murr spore powder.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.

GB/T 6682 Specifications and test methods for water used in analytical laboratories

GB 50073-2013 Clean workshop design specifications

Measures for the Supervision and Administration of Measurement of Quantitatively Packaged Commodities (Order No. 75 of the General Administration of Quality Supervision, Inspection and Quarantine [2005])

3 Terms and definitions

The following terms and definitions apply to this document.

4 Harvesting of Ganoderma spore powder