GB/T 29013-2012Road construction and road maintenance machinery and equipment - Slipform paver (English PDF)

1 Scope

This standard specifies the main parameters, technical requirements, test methods, inspection rules slip form concrete paver, logos, instructions for use

Books, packaging, transportation and storage.

This standard applies to self-propelled track sliding concrete paver (hereinafter referred to as sliding paver).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 3766 Hydraulic System General technical conditions

GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements

GB/T 8499 moving machinery - Determination of the position of the center of gravity method

GB/T 8593.1 moving machinery controls and other displays - Symbols - Part 1. Common symbols

GB/T 8593.2 moving machinery controls and other displays - Symbols - Part 2. for machines, equipment and enclosures

Special symbols member

GB/T 9969 General Instructions industrial products

GB/T 13306 signs

GB/T 14039 Hydraulic fluid level of contamination by solid particles

GB 16710 earthmoving machinery noise limits

GB/T 17299 moving machinery - Minimum inlet size

GB/T 17300 moving machinery passage means

GB/T 20082 Hydraulic fluid contamination using optical microscopy method for the determination of particulate contamination

GB 20178 Earth-moving machinery - Safety signs and hazard pictorials General

GB/T 20418 earthmoving machinery lighting, signal and marker lights and reflectors

GB/T 21154 earthmoving machinery machine and quality measurement equipment and components method

GB/T 21935 earthmoving machinery operated comfort zone and reach for

GB/T 23578 Road construction and maintenance machinery and equipment Slipform Paver Terminology and commercial specifications

GB /25613 Location moving machinery - Determination of emission sound pressure levels T set-test conditions

Determination of dynamic test conditions GB/T 25614 earthmoving machinery sound power level

GB/T 25615 Location moving machinery - Determination of emission sound pressure levels Dynamic test conditions

GB J97 cement concrete pavement construction and acceptance

JB/T 5000.12 Heavy Machinery General technical requirements - Part 12. Painting

JB/T 5939 construction machinery steel castings - General technical requirements

JB/T 5943 construction machinery welding parts General technical requirements

JB/T 5945 General technical conditions of construction machinery assembly

Technical specification pavement slide construction JTJ/T 037.1 cement concrete […]