Valid

GB/T 29012-2012Road construction and road maintenance machinery and equipment - Road joint sealing machine (English PDF)

道路施工与养护机械设备 道路灌缝机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29012-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2012

Implementation date

July 1, 2013

Scope

GB/T 29012-2012 is the English-translated version of 道路施工与养护机械设备 道路灌缝机.

GB/T 29012-2012 is the Chinese standard "Road construction and road maintenance machinery and equipment - Road joint sealing machine".

Its scope clause reads: This standard specifies the road construction and road maintenance machinery and equipment irrigation sewing machine (hereinafter referred to as irrigation sewing machine) terms and definitions, requirements, test Methods, inspection rules and signs, instructions, packaging, transportation and storage.

This standard applies to the installation path on the truck irrigation sewing machine. Towed irrigation sewing machine can also refer to use. Its clauses include terms and definitions; requirements.

Found what you need?

Document preview — GB/T 29012-2012

National Standard of the People's Republic of China

ICS
91.220
Classification
P 97

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Requirements

1 Scope

This standard specifies the road construction and road maintenance machinery and equipment irrigation sewing machine (hereinafter referred to as irrigation sewing machine) terms and definitions, requirements, test

Methods, inspection rules and signs, instructions, packaging, transportation and storage.

This standard applies to the installation path on the truck irrigation sewing machine. Towed irrigation sewing machine can also refer to use.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 3766 Hydraulic System General technical conditions

GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements

GB/T 8499 moving machinery - Determination of the position of the center of gravity method

GB/T 9969 General Instructions industrial products

GB/T 13306 signs

GB/T 14039 Hydraulic fluid level of contamination by solid particles

GB 16710 earthmoving machinery noise limits

GB/T 17299 moving machinery - Minimum inlet size

GB 20178 Earth-moving machinery - Safety signs and hazard pictorials General

Determination of GB/T 25612 earthmoving machinery sound power level of the stationary test conditions

JB/T 5943 construction machinery welding parts General technical requirements

JB/T 5945 General technical conditions of construction machinery assembly

JB/T 5946 construction machinery painting general technical conditions

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Road sealing machine

Can be thermal sealing material is continuously poured into the cracks in the road special equipment.

4 Requirements

4.1 machine

4.1.1

irrigation sewing machine should be able to work in ambient temperature 5 °C ~ 40 °C conditions.

4.1.2

The outside dimensions, quality, and Centroid machine should meet the design requirements.

4.1.3

The hydraulic system shall comply with GB/T 3766, and hydraulic oil temperature should not be higher than 80 °C, solid particle contamination of hydraulic oil, etc.

Level should not exceed GB/T 14039 of 18/15.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 29012-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29012-2012

$255.00