GB/T 29011-2012Building construction machinery and equipment - Hydraulic sheet pile press-in and extraction machinery - Terminology and commercial specifications (English PDF)
建筑施工机械与设备 液压式钢板桩压拔桩机 术语和商业规格
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29011-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2012
Implementation date
July 1, 2013
Scope
GB/T 29011-2012 is the English-translated version of 建筑施工机械与设备 液压式钢板桩压拔桩机 术语和商业规格.
GB/T 29011-2012 fixes the terminology and the commercial specifications of hydraulic sheet pile press-in and extraction machinery for building construction.
Clause 1 says the standard defines the terms, the definitions and the commercial specifications of the main types of this machinery, that it applies to hydraulic sheet pile press-in and extraction machines, and that machines for pressing in and extracting precast concrete piles may also refer to it.
The page shows no normative references clause and lists no quoted standard, so clause 2 is Terms and definitions, and it is there that the draft stops.
Clause 2 is organised by machine part: its 2.1.1 groups what makes up the press-in and extraction machine, with 2.1.1.1 the main body of the press-in/extraction machine, which moves itself along the sheet piles already driven and supports, pushes or pulls the pile, with a tilt adjustment device on some models, 2.1.1.2 the power unit, built from engine, pumps, control equipment and piping and either self-propelled on flat ground or fixed and moved by crane, and 2.1.1.3 the reaction stand, erected to obtain the initial reaction force where no sheet piles have yet been driven.
Clause 2.1.2 then turns to the main body itself, with 2.1.2.1 the reaction clamp or grip that holds the piles already driven, numbered from the front as number 1 and number 2, and 2.1.2.2 the saddle that carries the clamp.
The definitions point throughout to figures A.1 to A.5 of an appendix. The page files the standard under ICS 91.220 and Chinese classification P97, proposed by China Machinery Industry Federation and administered by SAC/TC328. It was issued on 31 December 2012 and has applied since 1 July 2013.
Found what you need?
Document preview — GB/T 29011-2012
National Standard of the People's Republic of China
- ICS
- 91.220
- Classification
- P 97
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Terms and definitions
Foreword
This standard GB/T 1.1-2009 rules drafted. The standard proposed by China Machinery Industry Federation.
1 Scope
This standard defines the main types of steel sheet pile hydraulic pressure pile driver Stubbs terms, definitions and commercial specifications.
This standard applies to hydraulic sheet pile pressure pulling tools, hydraulic concrete precast piles pile extractor can also refer to use.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Mechanical means
2.1.1 Pressure pile extractor constituted
2.1.1.1 Pressure pile driver Stubbs host main body of press-in/extraction machine
May under its own power on a steel sheet pile play set complete the move, and steel sheet pile play set for the completion of the support, pushed or pulled sheet piles mechanical. And some adjustments with tilt adjustment device is pressed into the steel sheet pile inclination (see Figure A.1 and A.2).
2.1.1.2 Power plant power unit
Stubbs pile driver for the host to provide means pressure hydraulic oil from the engine, pumps, control equipment and pipeline components. Stubbs pile driver with pressure applied in the host Mobile worker locations, including by its own means walking on a flat ground mobile self-propelled (see Figure A.3, j) and moved by a crane lifting Movable fixed (Figure A.4).
2.1.1.3 Reaction gantry reaction stand
In the absence of play set complete sheet piles, piles pressure in order to obtain an initial reaction force erection gantry (see Figure A.5). In reaction force units Foldable boom frame (see Figure A.5 of k) placing steel sheet pile as a reaction force with reuse, etc., by the pressure pile extractor host reaction force gripper Holding the reaction force of the gantry is holding portion (see Figure A.5 of l), this time with the quality of the reaction force and the counterweight mass reaction force of the gantry and the pressure pile extractor host Quality constitute pressure pile reaction force.
2.1.2 Pressure pile extractor host
2.1.2.1 Reaction fixture clamp, grip
Apparatus has been set up to fight the completed grip sheet piles (see Figure A.1 and A.2 of a) is used. Each reaction by starting from the front part of the jig Second order reaction force known as No. 1 fixture, 2 reaction fixtures.
2.1.2.2 Rail saddle
Reaction force for mounting the fixture base bracket (see Figure A.1 and A.2 of b).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29011-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 29011-2012
$255.00