GB/T 29001.5-2013Numerical control system of machine tool—Protocol specifications for NCUC-Bus fieldbus—Part 5: Conformance testing (English PDF)
机床数控系统 NCUC-Bus现场总线协议规范 第5部分:一致性测试
This is a limited preview
Buy now to download the full PDF (87 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29001.5-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
October 1, 2014
Scope
GB/T 29001.5-2013 is the English-translated version of 机床数控系统 NCUC-Bus现场总线协议规范 第5部分:一致性测试.
GB/T 29001.5-2013 is the Chinese standard "Numerical control system of machine tool -- Protocol specifications for NCUC-Bus fieldbus -- Part 5: Conformance testing".
Its scope clause reads: GB/T 29001 specifies the data types and basic data transmission methods of NCUC-Bus for numerical control systems of machine tool, and establishes the communication protocol specifications for NCUC-Bus for numerical control systems of machine tool and industrial automation control processes.
This Part of GB/T 29001 defines the system structure and test content of NCUC-Bus conformance testing. This Part is applicable to the conformance testing of numerical control systems of machine tool and their assemblies declared to be based on the NCUC-Bus standard.
The numerical control systems for other purposes may refer to this Part. Its clauses include terms and definitions & abbreviations; symbols and abbreviations; conformance testing content.
It was issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on DECEMBER 31, 2013 and took effect on OCTOBER 1, 2014.
Found what you need?
Document preview — GB/T 29001.5-2013
National Standard of the People's Republic of China
- ICS
- 25.040.20
- Classification
- J 50
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- Introduction4
- 1 Scope5
- 2 Normative References5
- 3 Terms and Definitions & Abbreviations5
- 3.1 Terms and Definitions5
- 3.2 Abbreviations9
- 4 Symbols and Abbreviations9
- 4.1 Overview9
- 4.2 Abstract Test Suite10
- 4.3 Executable Test Suite10
- 4.4 Conformance Testing Process10
- 5 Conformance Testing Content11
- 5.1 Overview11
- 5.2 Bus State Transition Test Group13
- 5.3 Bus Command Test Group41
- 5.4 Communication Error Detection and Recovery Test Group70
- Appendix A (Informative) Conformance Testing System Platform78
- Appendix B (Normative) PICS Document Specifications83
- References87
1 Scope
GB/T 29001 specifies the data types and basic data transmission methods of NCUC-Bus for numerical control systems of machine tool, and establishes the communication protocol specifications for NCUC-Bus for numerical control systems of machine tool and industrial automation control processes.
This Part of GB/T 29001 defines the system structure and test content of NCUC-Bus conformance testing.
This Part is applicable to the conformance testing of numerical control systems of machine tool and their assemblies declared to be based on the NCUC-Bus standard. The numerical control systems for other purposes may refer to this Part.
2 Normative References
The following documents are indispensable for the application of this document. In terms of references with a specified date, only the version with that specific date is applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document.
GB/T 29001.4-2012 Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 4: Application layer
3 Terms and Definitions & Abbreviations
The terms and definitions defined in GB/T 29001.1 and the following ones are applicable to this document. For ease of use, some terms and definitions in GB/T 29001.1 are repeated below.
3.1 Terms and Definitions
3.1.1 Protocol
The agreement on data format, timing relationship and error correction method in communication system data exchange. [GB/T 29001.1-2012, definition 3.1.1]
3.1.2 Bus
Refers to a set of transmission lines that transmit information from one or more source components to one or more destination components through time-division multiplexing. It is a common channel for transmitting data in a communication system. [GB/T 29001.1-2012, definition 3.1.2]
3.1.3 Device
Refers to a physical entity with specific functional behaviors connected to the communication network, such as a numerical control device, servo drive device or I/O device connected to the NCUC-Bus network. Each device has a unique device address in NCUC-Bus. [GB/T 29001.1-2012, definition 3.1.6]
3.1.4 Master device
A device in a network that initiates communication. The NCUC-Bus protocol stipulates that there can only be one master device in an NCUC-Bus loop, usually a numerical control device.
NOTE: The master device is also called the master station. [GB/T 29001.1-2012, definition 3.1.7]
3.1.5 Slave device
Other devices in the network that are connected to the NCUC-Bus network in addition to the master device, such as a servo drive device or I/O device.
NOTE: The slave device is also called the slave station. [GB/T 29001.1-2012, definition 3.1.8]
3.1.6 Broadcast
The most common form of multi-device communication in a network, where the sender delivers a copy of the packet to each destination device. The sending end can do this by delivering multiple single packets, or it can pass copies of the packets over separate connections until each recipient has received a copy. [GB/T 29001.1-2012, definition 3.1.9]
3.1.7 Single address transmission
Single address transmission refers to the relationship between two devices transmitting in the network. Single address transmission refers to the sending end transmitting data to the specified device in the network. [GB/T 29001.1-2012, definition 3.1.10]
3.1.8 Slave device information train packed transmission
The sending end encapsulates the data that needs to be transmitted to each slave device in the network into a data packet in turn, and then sends it out from a port of the sending end, passes through each slave device in turn, and then returns to another port or the same port of the master device. When the data packet passes, the slave device downloads the data transmitted by the master device to the device based on the address information in the data packet, and at the same time uploads the data that needs feedback into the data packet. [GB/T 29001.1-2012, definition 3.1.11]
3.1.9 Topology structure
The network topology structure refers to the application of topological methods - which study the relationships between points and lines independent of size or shape - to a network context.
In this framework, communication devices within the network are abstracted as points, and transmission media are abstracted as lines; the resulting geometric figure formed by these points and lines constitutes the network topology structure. The network topology structure reflects the structural relationships among the various entities within a network; it constitutes the first step in establishing a network and serves as the foundation for implementing various network protocols. Topology structures primarily include star, ring, linear, tree, and mesh structures. [GB/T 29001.1-2012, definition 3.1.12]
3.1.10 Linear structure
A type of network topology structure - specifically, a routing method in which devices are connected sequentially via communication lines. [GB/T 29001.1-2012, definition 3.1.13]
3.1.11 Ring structure
A type of network topology structure - specifically, a routing method in which devices form a closed loop via communication lines. [GB/T 29001.1-2012, definition 3.1.14]
3.1.12 Cycle communication
An information exchange activity where the content possesses strict real-time constraints; devices communicate at specific, regular intervals. [GB/T 29001.1-2012, definition 3.1.15]
3.1.13 Cycle data
Data that possesses strict real-time constraints. [GB/T 29001.1-2012, definition 3.1.16]
3.1.14 Non-cycle communication
An information exchange activity where the content does not possess strict real-time constraints. [GB/T 29001.1-2012, definition 3.1.17]
3.1.15 Implementation under test, IUT
The specific implementation of the NCUC-Bus communication protocol stack under test; serving as the object of conformance testing, it is either a master device or a slave device implemented based on the NCUC-Bus protocol.
3.1.16 Conformance testing
The degree to which the conformance of the NCUC-Bus protocol implementation in the IUT is tested.
3.1.17 Lower tester, LT
A test procedure that, during the execution of conformance testing, indirectly controls and observes the lower service boundary of the IUT through the underlying service provider.
3.1.18 Upper tester agent, UTA
The user program that implements the upper-layer test agent functionality for the IUT.
NOTE: The UTA cooperates with the LT to test the IUT by receiving commands issued by the LT.
Acting as the controller for the IUT, it receives control messages transmitted from the lower tester to the UTA, thereby triggering the IUT to actively issue NCUC-Bus command request messages; acting as the user layer, it performs basic processing on received and transmitted user data to generate user-layer data.
3.1.19 Protocol implementation conformance statement, PICS
A statement declaring the conformance of a protocol implementation to a given specification; it outlines which capabilities of the NCUC-Bus protocol have been implemented and declares support for specific bus commands, error detection mechanisms, network topology types, and other relevant information.
3.1.20 System under test
The system comprising the IUT and the UTA.
3.1.21 Test case
The test cases used for NCUC-Bus conformance testing, including both abstract test cases and executable test cases.
3.1.22 Test system
The test system that provides NCUC-Bus conformance testing services, comprising the lower tester and associated peripheral devices.
3.2 Abbreviations
The following abbreviations are applicable to this document.
CRC. Cyclic Redundancy Check
MIUT. Master Device Implementation Under Test
NCUC-Bus. NC Union of China Field Bus
PTP. Precision Time Protocol
SIUT. Slave Device Implementation Under Test
4 Symbols and Abbreviations
4.1 Overview
The NCUC-Bus conformance testing system consists of the system under test and the test system; its structure is illustrated in Figure 1. For details regarding the composition and setup of the NCUC-Bus conformance testing system platform, please refer to Appendix A.
The system under test consists of two components. the IUT and the UTA. The IUT comprises two types. the MIUT and the SIUT. During testing, the MIUT must incorporate a UTA, whereas the SIUT does not require a UTA.
The test system primarily consists of the LT, which is a conformance testing program running on a test computer. This program includes the PICS document, the abstract test suite, the executable test suite, and other components; the PICS document specifications must comply with the requirements set forth in Appendix B.
The LT interacts with the UTA via UTA-specific commands and facilitates the exchange of test data through NCUC-Bus service messages. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 87 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 29001.5-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 29001.4-2012 — Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 4: Application layer
GB/T 29001.3-2012 — Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 3: Data link layer
GB/T 29001.2-2012 — Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 2: Physical layer
GB/T 29001.5-2013
$830.00