Valid

GB/T 29001.2-2012Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 2: Physical layer (English PDF)

机床数控系统 NCUC-Bus现场总线协议规范 第2部分:物理层

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29001.2-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2012

Implementation date

July 1, 2013

Scope

GB/T 29001.2-2012 is the English-translated version of 机床数控系统 NCUC-Bus现场总线协议规范 第2部分:物理层.

GB/T 29001.2-2012 is the Chinese standard "Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 2: Physical layer".

Its scope clause reads: GB/T 29001 specifies the CNC system NCUC-Bus Fieldbus (hereinafter referred to as NCUC-Bus) and basic data types Data transmission, communication protocols established NCUC-Bus for CNC machine tools and industrial automation and control processes prescribed specification.

This section GB/T 29001 specifies the requirements for NCUC-Bus physical layer, and specifies the requirements for media and network configuration. This section applies to CNC machine tools.

Other uses of the NC system can refer to this section. Note 1. The first layer is consistent NCUC-Bus physical layer and GB/T 9387.1-1998 defined seven-layer model of ISO /OSI's.

Note 2. The media and network configuration requirements NCUC-Bus prescribed to ensure, prior to the data link layer error checking of data integrity and physical layer device Interoperability between. Its clauses include terms and definitions, abbreviations.

Found what you need?

Document preview — GB/T 29001.2-2012

National Standard of the People's Republic of China

ICS
25.040.20
Classification
J 50

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions, abbreviations
  • 3.1 Terms and definitions
  • 3.2 Acronyms
  • 4 Overview
  • 5 Architecture
  • 6 physical topology
  • 6.1 Overview
  • 6.2 annular structure
  • 6.3 Single-linear structure
  • 6.4 pairs of linear structure
  • 7.1 Overview
  • 7.2 connection terminals
  • 7.3 communication cable
  • 7.4 Status Indicator
  • 8 Electrical Characteristics
  • 10 9 procedural characteristics
  • 10 identifies
  • Appendix A (informative) connected to terminal

1 Scope

GB/T 29001 specifies the CNC system NCUC-Bus Fieldbus (hereinafter referred to as NCUC-Bus) and basic data types

Data transmission, communication protocols established NCUC-Bus for CNC machine tools and industrial automation and control processes prescribed specification.

This section GB/T 29001 specifies the requirements for NCUC-Bus physical layer, and specifies the requirements for media and network configuration.

This section applies to CNC machine tools. Other uses of the NC system can refer to this section.

Note 1. The first layer is consistent NCUC-Bus physical layer and GB/T 9387.1-1998 defined seven-layer model of ISO /OSI's.

Note 2. The media and network configuration requirements NCUC-Bus prescribed to ensure, prior to the data link layer error checking of data integrity and physical layer device

Interoperability between.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 4208-2008 housing protection (IP Code) (IEC 60529.2001, IDT)

GB/T 9387.1-1998 Information technology - Open Systems Interconnection - Basic Reference Model - Part 1. Basic model (idt ISO /

IEC 7498-1.1994)

Electrical characteristics GB/T 11014-1989 balanced voltage digital interface circuits

GB/T 18015.1-2007 digital communications quad Multicore and symmetrical cables Part 1. Generic specification (IEC 61156-1.

2002, IDT)

GB/T 29001.1-2012 CNC system NCUC-Bus Fieldbus protocol specification - Part 1. General

ANSI/T IA/EIA568-B Commercial Building Telecommunications Cabling Standard (Commercialbuildingtelecommunications cablingstandard)

Inter IEEEStd802.3-2005 IT system communication and information exchange between LAN and MAN special requirements of Part 3

Score. with collision detection Carrier Sense Multiple Access from (CSMA/CD) access method and physical layer specifications (Informationtechnology-Tele- communicationsandinformationexchangebetweensystems-Localandmetropolitanareanetworks-Specific requirements-Part 3. Carriersensemultipleaccesswithcolisiondetection (CSMA/CD) accessmethodand physicallayerspecifications)

IEEEStd1394a-2000 High Performance Serial Bus IEEE Standard - 1st revision (IEEEstandardforahigh perormanceserialbus-Amendment1)

USBSpecificationRevision2.0 USB Universal Serial Bus Specification 2.0 Specification (Universalserialbusspecifica- tionrevision2.0)

3 Terms and definitions, abbreviations

3.1 Terms and Definitions

GB/T 29001.1 defined and the following terms and definitions apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 29001.2-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29001.2-2012

$255.00