Valid

GB/T 29001.1-2012Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 1: General principles (English PDF)

机床数控系统 NCUC-Bus现场总线协议规范 第1部分:总则

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29001.1-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2012

Implementation date

July 1, 2013

Scope

GB/T 29001.1-2012 is the English-translated version of 机床数控系统 NCUC-Bus现场总线协议规范 第1部分:总则.

GB/T 29001.1-2012 is the Chinese standard "Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 1: General principles".

Its scope clause reads: GB/T 29001 specifies the CNC system NCUC-Bus Fieldbus basic data types and data transmission, establish Communication protocol specification NCUC-Bus for CNC machine tools and industrial automation and control processes developed.

This section GB/T 29001 specifies the NCUC-Bus network topology, device model, network-level model, the communication state machine The main content of the communication process and general principles.

This section applies to CNC machine tools. Other uses of the NC system can refer to this section. Its clauses include terms and definitions, abbreviations.

Found what you need?

Document preview — GB/T 29001.1-2012

National Standard of the People's Republic of China

ICS
25.040.20
Classification
J 50

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions, abbreviations
  • 3.1 Terms and definitions
  • 3.2 Abbreviations
  • 4.1 Overview
  • 4.2 NCUC-Bus communication needs
  • 4.3 NCUC-Bus network topology
  • 4.4 NCUC-Bus network model hierarchy
  • 4.5 NCUC-Bus device model
  • 4.6 NCUC-Bus Synchronization
  • 4.7 NCUC-Bus failure detection
  • 4.8 NCUC-Bus equipment redundancy
  • 4.9 NCUC-Bus state machine
  • 4.10 NCUC-Bus communication reliability, security
  • 4.11 NCUC-Bus bridging model with a third party bus
  • 5 NCUC-Bus layers Overview
  • 5.1 NCUC-Bus physical layer
  • 5.2 NCUC-Bus data link layer
  • 5.3 NCUC-Bus application layer
  • References

1 Scope

GB/T 29001 specifies the CNC system NCUC-Bus Fieldbus basic data types and data transmission, establish

Communication protocol specification NCUC-Bus for CNC machine tools and industrial automation and control processes developed.

This section GB/T 29001 specifies the NCUC-Bus network topology, device model, network-level model, the communication state machine

The main content of the communication process and general principles.

This section applies to CNC machine tools. Other uses of the NC system can refer to this section.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments list) are applicable to this document.

GB/T 9387.1-1998 Information technology - Open Systems Interconnection - Basic Reference Model - Part 1. Basic model (idt ISO /

IEC 7498-1.1994)

Inter IEEEStd802.3-2005 IT system communication and information exchange between LAN and MAN special requirements of Part 3

Score. with collision detection Carrier Sense Multiple Access from (CSMA/CD) access method and physical layer specifications (Informationtechnology-Tele- communicationsandinformationexchangebetweensystems-Localandmetropolitanareanetworks-

Specificrequirements-Part 3. Carriersensemultipleaccesswithcolisiondetection (CSMA/CD) access methodandphysicallayerspecifications)

3 Terms and definitions, abbreviations

3.1 Terms and Definitions

The following terms and definitions apply to this document.

3.1.1 Agreement protocol

The communication system for data exchange in the data format, error correction method and timing relationships conventions.

3.1.2 Bus

Through time-multiplexed manner, information is transferred from one or more source components to one or more destination components of a set of transmission lines, is through

Communication system transmitting data in a common channel.

3.1.3 Physical layer

In the ISO /OSI reference model the bottom communication is the foundation of the entire communication system. The physical layer is the data communication between devices mentioned

For transmission media and connected devices, to provide a reliable environment for data transmission, including the transmission medium (fiber optic, twisted pair, coaxial cable, etc.), the connection […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 29001.1-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29001.1-2012

$195.00