Valid

GB/T 29001.3-2012Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 3: Data link layer (English PDF)

机床数控系统 NCUC-Bus现场总线协议规范 第3部分:数据链路层

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29001.3-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2012

Implementation date

July 1, 2013

Scope

GB/T 29001.3-2012 is the English-translated version of 机床数控系统 NCUC-Bus现场总线协议规范 第3部分:数据链路层.

GB/T 29001.3-2012 is the Chinese standard "Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 3: Data link layer".

Its scope clause reads: GB/T 29001 specifies the CNC system NCUC-Bus (NCUnionofChinaFieldBus, NC Union bus, the following Acronym NCUC-Bus) data types and basic data transmission, and to establish a CNC system for industrial automation NCUC-Bus Automation control process and the development of communication protocol specification.

This section GB/T 29001 specifies the NCUC-Bus data link layer between the basic device with the effectiveness of the message through Letter rules also define the NCUC-Bus data link layer protocol.

This section applies to CNC machine tools. Other uses of the NC system can refer to this section. Note.

This section is based on the following terms set forth in an abstract way the externally visible service NCUC-Bus data link layer provides. primitives a) Service Mutual c) between these actions and events; actions and events; b) the primitive actions and various parameters associated with each event, and the form they use Relationships, and their effective order. Its clauses include terms and definitions, abbreviations.

Found what you need?

Document preview — GB/T 29001.3-2012

National Standard of the People's Republic of China

ICS
25.040.20
Classification
J 50

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions, abbreviations
  • 3.1 Terms and definitions
  • 3.2 Acronyms
  • 4 6 Overview of the Data Link Layer
  • 5 data link layer packet format and type of service
  • 5.1 Data frame definition and packaging
  • 5.2 delimitation and frame synchronization field
  • 6.1 link connection establishment
  • 6.3 Data link failure
  • 13 data link layer
  • 7.1 Link Transport Service
  • 7.2 link transmission flow control
  • 8 error detection and recovery
  • 8.1 Error detection
  • 8.2 Error Correction
  • 8.3 NCUC-Bus link fault tolerance
  • 8.4 NCUC-Bus communication failure
  • References

1 Scope

GB/T 29001 specifies the CNC system NCUC-Bus (NCUnionofChinaFieldBus, NC Union bus, the following

Acronym NCUC-Bus) data types and basic data transmission, and to establish a CNC system for industrial automation NCUC-Bus

Automation control process and the development of communication protocol specification.

This section GB/T 29001 specifies the NCUC-Bus data link layer between the basic device with the effectiveness of the message through

Letter rules also define the NCUC-Bus data link layer protocol.

This section applies to CNC machine tools. Other uses of the NC system can refer to this section.

Note. This section is based on the following terms set forth in an abstract way the externally visible service NCUC-Bus data link layer provides. primitives a) Service

Mutual c) between these actions and events; actions and events; b) the primitive actions and various parameters associated with each event, and the form they use

Relationships, and their effective order.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 9387.1-1998 Information technology - Open Systems Interconnection - Basic Reference Model - Part 1. Basic model (idt ISO /

IEC 7498-1.1994)

GB/T 29001.1-2012 CNC system NCUC-Bus Fieldbus protocol specification - Part 1. General

GB/T 29001.4-2012 CNC system NCUC-Bus Fieldbus protocol specification - Part 4. Application Layer

Inter IEEEStd802.3-2005 IT system communication and information exchange between LAN and MAN special requirements of Part 3

Score. with collision detection Carrier Sense Multiple Access from (CSMA/CD) access method and physical layer specifications (Informationtechnology-Tele- communicationsandinformationexchangebetweensystems-Localandmetropolitanareanetworks-Specific requirements-Part 3. Carriersensemultipleaccesswithcolisiondetection (CSMA/CD) accessmethodand physicallayerspecifications)

3 Terms and definitions, abbreviations

3.1 Terms and Definitions

GB/T 29001.1 defined and the following terms and definitions apply to this document.

3.1.1 Agreement protocol

The communication system for data exchange in the data format, error correction method and timing relationships conventions.

[GB/T 29001.1-2012, the definition 3.1.1] […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 29001.3-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29001.3-2012

$315.00