GB/T 28878.3-2016Specification of the rotating component in space science experiments—Part 3: Ball bearing acceptance (English PDF)
空间科学实验转动部件规范 第3部分：滚动轴承验收
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28878.3-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 29, 2016
Implementation date
November 1, 2016
Scope
GB/T 28878.3-2016 is the English-translated version of 空间科学实验转动部件规范 第3部分：滚动轴承验收.
GB/T 28878.3-2016 is the Chinese standard "Specification of the rotating component in space science experiments—Part 3: Ball bearing acceptance". Its scope clause reads: This part of GB/T 28878 specifies the conditions, procedures and requirements for the acceptance of rolling bearings in rotating parts of space science experimental installations.
Law, inspection rules and delivery preparation. This part is applicable to the rolling bearing acceptance of the rotating parts used in the space science experimental device.
It is also applicable to the rolling bearing after the extended storage Of the retest. Other space rotating parts of the rolling bearing acceptance can refer to use.
Note. In this section, in the absence of any ambiguity, this part of the rolling bearing to the ball bearing and thrust ball bearings. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 28878.3-2016
National Standard of the People's Republic of China
- ICS
- 49.035
- Classification
- V 22
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 Acceptance conditions and process
- 4.1 Acceptance conditions
- 4.2 Acceptance Process
- 5.1 Acceptance test environment
- 5.2 Acceptance test items and methods
- 6.1 Inspection Responsibility
- 6.2 Inspection Classification
- 6.3 Identification test
- 6.4 Review of inspection
- 6.5 review inspection judgment
- 6.6 Review of special bearings
- 7 product receiving
- 7.1 bearing number and logo
- 7.2 mark
- 7.3 Packing
- 7.4 List of documents
1 Scope
This part of GB/T 28878 specifies the conditions, procedures and requirements for the acceptance of rolling bearings in rotating parts of space science experimental installations.
Law, inspection rules and delivery preparation.
This part is applicable to the rolling bearing acceptance of the rotating parts used in the space science experimental device. It is also applicable to the rolling bearing after the extended storage
Of the retest. Other space rotating parts of the rolling bearing acceptance can refer to use.
Note. In this section, in the absence of any ambiguity, this part of the rolling bearing to the ball bearing and thrust ball bearings.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Rolling bearings - Overall dimensions - Part 3. Radial bearings
GB/T 307.1 Rolling bearings - Centrifugal bearing tolerances
Rules and methods for measurement and inspection of rolling bearings GB/T Rolling bearing tolerances - Part 4. Thrust ball bearings GB/T GB/T 3086 high carbon chromium stainless steel bearing steel
Anti - rust packaging for rolling bearings GB/T GB/T 18254 high carbon chromium bearing steel
GB/T 24605 Rolling bearing product mark
GB/T 24606 Non - destructive testing of rolling bearings - Magnetic particle testing
GB/T 24610.2 Roller bearing vibration measurement method - Part 2. Radial ball bearings with cylindrical bore and cylindrical outer surface
GB/T 25915.1-2010 clean rooms and associated controlled environments - Part 1. Air cleanliness class
Specification for rotating parts of space science - Part 1. Design terminology GB/T 28878-1
Technical condition of GJB269 aviation rolling bearing
General specification for military miniature bearings
JB/T 1460 Rolling bearing high carbon chromium stainless steel bearing parts heat treatment technical conditions
Rolling bearings - Miniature ball bearings - Technical specification GB/T JB/T 4037 Rolling bearings - Phenolic laminates - Technical condition
Disassembly of JB/T 6641 Rolling Bearing and Its Evaluation Method
JB/T 7050 Rolling bearing cleanliness evaluation method
Measurement and evaluation of surface roughness of JB/T 7051 rolling bearing parts
JB/T 10861 Rolling bearing steel ball surface defects Atlas and evaluation methods
3 terms and definitions
GB/T 28878.1 Definitions of terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28878.3-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 28878.1-2012 — Specification of the rotating component in space science experiments - Part 1: General requirements of design
GB/T 28878.10-2019 — Specification of the rotating component in space science experiments—Part 10: Storage and reinspection
GB/T 28878.2-2016 — Specification of the rotating component in space science experiments—Part 2: Requirements of lubrication design
Secure payment via Stripe
Payments accepted
GB/T 28878.3-2016
$135.00