GB/T 28878.5-2016Specification of the rotating component in space science experiments—Part 5: Motors acceptance (English PDF)
空间科学实验转动部件规范 第5部分：电机验收
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 28878.5-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 29, 2016
Implementation date
November 1, 2016
Scope
GB/T 28878.5-2016 is the English-translated version of 空间科学实验转动部件规范 第5部分：电机验收.
GB/T 28878.5-2016 is the Chinese standard "Specification of the rotating component in space science experiments—Part 5: Motors acceptance". Its scope clause reads: This part of GB/T 28878 specifies the conditions, procedures, requirements for the acceptance of the motor in the rotating parts of the space science experimental setup.
Law and inspection rules and product acceptance requirements. This part applies to the acceptance of the drive motor and signal motor used in the rotating parts of the space science experimental setup.
Other space to turn The acceptance of the motor used in the part can be used. Note. In this part of the case in the absence of ambiguity, the drive motor is mainly stepper motor, brushless DC motor, DC servo motor, permanent magnet AC servo Such as the motor; the signal motor is the main multi-pole and dual-channel rotary transformer. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 28878.5-2016
National Standard of the People's Republic of China
- ICS
- 49.035
- Classification
- V 22
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 Acceptance conditions and process
- 4.1 Acceptance conditions
- 4.2 Acceptance Process
- 5.1 Acceptance test Environmental conditions
- 5.2 Determination of product acceptance status
- 5.3 Quality control inspection of product development process
- 5.4 Document inspection of the product
- 5.5 Test items and methods
- 6.1 Inspection Responsibilities
- 6.2 Inspection Classification
- 6.3 Identification test
- 6.4 Review of inspection
- 6.5 Test items cut
- 6.6 judgment
- 7 product receiving
- 7.1 Delivery of product identification and packaging
- 7.2 accompanying documents
- Appendix A (normative appendix) Motor additional test items
1 Scope
This part of GB/T 28878 specifies the conditions, procedures, requirements for the acceptance of the motor in the rotating parts of the space science experimental setup.
Law and inspection rules and product acceptance requirements.
This part applies to the acceptance of the drive motor and signal motor used in the rotating parts of the space science experimental setup. Other space to turn
The acceptance of the motor used in the part can be used.
Note. In this part of the case in the absence of ambiguity, the drive motor is mainly stepper motor, brushless DC motor, DC servo motor, permanent magnet AC servo
Such as the motor; the signal motor is the main multi-pole and dual-channel rotary transformer.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 2828.1-2012 Count Sampling Inspection Procedures Part 1. Batch Inspection Sampling by Reception Quality Limit (AQL) plan
GB/T 25915.1-2010 clean rooms and associated controlled environments - Part 1. Air cleanliness class
Specification for rotating parts of space science - Part 1. Design terminology GB/T 28878-1
Specification for GJB271 Controlled Motor Packaging
GJB361A -.1997 General specification for control motors
Specification for general purpose of brushless DC motors GB/T Generic specification for multipole and dual - channel rotary transformers GJB2143-1994
General specification for stepper motors GJB2441A -.2012
Generic specification for permanent magnet AC servo motors GJB2549-1995
General specification for DC servo motors
3 terms and definitions
GB/T 28878.1 Definitions and the following terms and definitions apply to this document.
3.1 Acceptance of quality limit
When a continuous series of batches are submitted for acceptance sampling, the worst quality of the worst-case process is allowed.
3.2 Failure
Product loss of prescribed function.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 28878.5-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 28878.6-2016 — Specification of the rotating component in space science experiments—Part 6: Property testing
GB/T 28878.4-2016 — Specification of the rotating component in space science experiments—Part 4: Lubrication oil acceptance
GB/T 28878.7-2016 — Specification of the rotating component in space science experiments—Part 7: Reliability test
Secure payment via Stripe
Payments accepted
GB/T 28878.5-2016
$205.00