Valid

GB/T 28596-2012Internal carbon coated Polyethylene terephthalate (PET) bottle (English PDF)

内壁碳涂层聚对苯二甲酸乙二醇酯瓶

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28596-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 29, 2012

Implementation date

July 1, 2013

Scope

GB/T 28596-2012 is the English-translated version of 内壁碳涂层聚对苯二甲酸乙二醇酯瓶.

GB/T 28596-2012 is the Chinese standard "Internal carbon coated Polyethylene terephthalate (PET) bottle".

Its scope clause reads: This standard specifies the carbon coating the inner wall of polyethylene terephthalate (PET) bottles (hereinafter referred to as "bottles") terms and definitions, classifications, to Requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to polyethylene terephthalate resin as raw materials, injection molding, stretch blow molding, and the inner wall of the carbon coating layer High gas barrier food bottles. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 28596-2012

National Standard of the People's Republic of China

ICS
83.140.01
Classification
Y 28

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Category
  • 5 raw material
  • 6 requires
  • 8 Inspection Rules
  • 9 signs, packaging, transportation and storage
  • Appendix A (informative) water temperature - density table
  • Appendix B (normative) Test method for oxygen transmission rate (equal pressure method)
  • Annex C (normative) Rapid Detection of carbon dioxide loss

1 Scope

This standard specifies the carbon coating the inner wall of polyethylene terephthalate (PET) bottles (hereinafter referred to as "bottles") terms and definitions, classifications, to

Requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to polyethylene terephthalate resin as raw materials, injection molding, stretch blow molding, and the inner wall of the carbon coating layer

High gas barrier food bottles.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan

GB 9685 food containers and packaging materials additives health standards

GB/T 10792 carbonated beverages (soft drinks)

GB 13113 food containers and packaging materials polyethylene terephthalate moldings health standards

GB 13114 food containers and packaging materials polyethylene terephthalate resin hygiene standards

GB/T 16288 plastic signs

GB 17931 bottle with polyethylene terephthalate (PET) resin

GB/T 19789 packaging material of plastic film and sheet oxygen permeability test coulometer detection

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Perfusion point filingpoint

Plane from the bottle to the level of a certain distance from the point.

3.2 Verticality perpendicularity

Vertical axis deviation geometrical center axis of the bottle and the bottom plane.

Category 4

4.1 by containing the contents divided into categories

Wine bottles and beverage bottles.

4.2

by containing the contents of the oxygen barrier performance requirements are divided into. high oxygen barrier bottles and bottles of low oxygen barrier properties.

4.3 divided by containing the contents of the pressure

pressure bottles and non-pressure bottle.

4.4

whether the content by dressed-containing gas is divided into. carbon dioxide (CO2) and without bottle dioxide (CO2) bottles.

4.5 divided by the bottle Color

colorless bottles and colored bottles.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28596-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28596-2012

$255.00