Valid

GB/T 28587-2012Inertial measurement unit in the mobile mapping system (English PDF)

移动测量系统惯性测量单元

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28587-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 29, 2012

Implementation date

October 1, 2012

Scope

GB/T 28587-2012 is the English-translated version of 移动测量系统惯性测量单元.

GB/T 28587-2012 is the Chinese standard "Inertial measurement unit in the mobile mapping system".

Its scope clause reads: This standard specifies the mobile measurement system inertial measurement unit (IMU) product classification, technical requirements, test methods, inspection rules, Instrument packaging, labeling, transportation and storage methods.

This standard applies to mobile measuring systems (airborne, vehicle and ship, etc.) in the inertial measurement unit (IMU) design, testing and production test. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 28587-2012

National Standard of the People's Republic of China

ICS
07.040
Classification
A 75

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Product Classification
  • 6 3 General technical requirements
  • 6.1 Visual inspection
  • 6.2 Function check
  • 7 parametric test
  • 7.1 Test conditions
  • 7.2 Standard Equipment
  • 7.3 Test item
  • 8 Test Method
  • 8.1 leveling turntable
  • 8.2 to establish five known target azimuth
  • 8.4 Accuracy of pitch angle theta deltatheta
  • 8.5 precision roll angle phi deltaphi
  • 8.6 output stability BS
  • 8.7 Power Repeatability BR
  • 9 7 Environmental Testing
  • 10 7 Flag
  • 11 Packaging
  • 12 Transport
  • 13 Storage
  • Appendix A (informative) Calculation Example 9 inspection records

1 Scope

This standard specifies the mobile measurement system inertial measurement unit (IMU) product classification, technical requirements, test methods, inspection rules,

Instrument packaging, labeling, transportation and storage methods.

This standard applies to mobile measuring systems (airborne, vehicle and ship, etc.) in the inertial measurement unit (IMU) design, testing and production test.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191 Packing Pictorial marking

GB/T 2423.1 ~ 2423.10, 2423.25 ~ 2423.27 Environmental testing for electric and electronic products

GB/T 15464 instrumentation packaging technology

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Mobile measuring system

Surveying the field of aircraft, ships, cars, etc. as the carrier, carrying surveying instruments surveying and mapping operations system.

3.2 Inertial Measurement Unit (IMU)

Axis gyro uniaxial gyroscope consists of three orthogonally mounted or two orthogonally mounted accelerometers three orthogonally mounted, related auxiliary

Road and structures and other parts, three-dimensional motion vectors for measuring angular velocity and non-gravitational acceleration (specific force) devices.

3.3 Turntable

Reproducing apparatus for angular movement of the spacecraft attitude, single-axis rotary table, biaxial and triaxial turntable turntable points.

3.4 IMU stability

Under static conditions, the output of the IMU measure the degree of dispersion around its mean. Standard deviation within a predetermined time to output table

Shown, including output stability IMU three axes.

3.5 IMU boot repeatability

Within the same conditions and at predetermined intervals of time, repeatedly energizing process, IMU output relative to its mean degree of dispersion in several tests

The standard deviation of the resulting bias, said IMU comprises three axial output repeatability.

3.6 Pitch angle pitch

Heading angle longitudinaltilt […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28587-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28587-2012

$255.00