GB/T 28571.1-2012The telecom equipment cabinet - Part 1: General specification (English PDF)

1 Scope

This section GB/T 28571 specifies the size parameters, performance requirements and guidelines for the application of telecommunications equipment cabinet.

This part is suitable for indoor installation of telecommunications equipment cabinet (hereinafter referred to as "cabinet").

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191-2008 Packaging - Pictorial signs

GB/T 1184-1996 shape and position tolerances without individual tolerance value

GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without individual tolerance

GB/T 2406.2-2009 Plastics - Determination of burning behavior by oxygen index Part 2 Method. room temperature test

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat

GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db. Damp heat (12h

12h cycle)

GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock

GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test FC. Vibration (sinusoidal)

GB 4208-2008 shell protection (IP code)

GB/T 4798.1-2005 application of electric and electronic products environmental conditions - Part 1. Storage

GB/T 4798.3-2007 application of electric and electronic products environmental conditions - Part 3. Stationary use at weather protected locations

GB 4943-2001 Safety of information technology equipment

GB/T 5095.2-1997 electronic equipment - Basic testing procedures and measuring methods - Electromechanical components - Part 2. General examination, electrical

Continuity and contact resistance tests, insulation tests and voltage stress tests

GB/T 6388 transport package shipping mark

GB/T 8582 electrical and electronic equipment mechanical structure terminology

GB/T 17742-2008 Chinese seismic intensity scale

GB/T 18663.1-2008 electronic equipment and mechanical structures metric series inch series of tests - Part 1. cabinets, racks,

Plug and chassis Climate mechanical tests and safety requirements

GB/T 19290.3-2008 development of mechanical structures modulo sequence electronic equipment - Part 2-1 isomer. Sectional specification 25mm

Interface coordination dimensions size device isomers of cabinets and racks of detailed specification

GB/T 19520.17-2010 electronic equipment mechanical structure 482.6mm (19in) series of mechanical structure size first section 3-105

Points. 1U height enclosure dimensions and design requirements

YD5083-2005 telecommunications equipment performance testing anti-seismic norms

IEC 61587-2.2011 Electronic equipment and mechanical structures Metric series test - Part 2 Inch series. cabinets and racks

Seismic test (Mechanicalstructuresforelectronicequipment-TestsforIEC 60917and60297-Part 2.

Seismictestsforcabinetsandracks) […]