Valid

GB/T 28564-2012Cabinets for electrotechnical and electronic equipment - Modular design requirements (English PDF)

电工电子设备机柜 模数化设计要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 28564-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 29, 2012

Implementation date

November 1, 2012

Scope

GB/T 28564-2012 is the English-translated version of 电工电子设备机柜 模数化设计要求.

GB/T 28564-2012 is the Chinese standard "Cabinets for electrotechnical and electronic equipment - Modular design requirements".

Its scope clause reads: This standard specifies the electrical and electronic equipment cabinet modular design of General, modulus SI units under typical ruler inch units under Reference point inch cabinet modular design (origin), the application of two modulus size system in a cabinet is modular design sizes Use and cabinets modular design tolerances.

This standard applies to electrical and electronic equipment cabinet (hereinafter referred to as "cabinets") of modular design. Its clauses include terms and definitions; general.

Found what you need?

Document preview — GB/T 28564-2012

National Standard of the People's Republic of China

ICS
31.240
Classification
K 05

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 General

1 Scope

This standard specifies the electrical and electronic equipment cabinet modular design of General, modulus SI units under typical ruler inch units under

Reference point inch cabinet modular design (origin), the application of two modulus size system in a cabinet is modular design sizes

Use and cabinets modular design tolerances.

This standard applies to electrical and electronic equipment cabinet (hereinafter referred to as "cabinets") of modular design.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 3047.1-1995 height of 20mm hex panels, rack and cabinets Series of basic dimensions

GB/T 8582-2008 term structural mechanical electrical and electronic equipment

Mechanical structures for electronic equipment modulo sequence Part 1 Development of GB/T 19290.1-2003. Generic specification

GB/T 19290.2-2003 development of electronic equipment - Part 2 isomer mechanical structure number sequence mode. Sectional specification set 25mm

Interface coordination dimensions of equipment isomer

GB/T 19290.3-2008 development of mechanical structures modulo sequence electronic equipment - Part 2-1 isomer. Sectional specification 25mm

Interface coordination dimensions size device isomers of cabinets and racks of detailed specification

GB/T 19290.4-2009 mechanical structures - Part 2-2 modulo sequence electronics isomer Development. specification 25mm

Interface coordination dimensions equipment practice detailed specifications Dimensions plug-in box, chassis, backplanes, panels and plug-ins

GB/T 19520.1-2007 electronic equipment mechanical structure 482.6mm (19in) series of mechanical structure size - Part 1. surface

Plate and frame

GB/T 19520.2-2007 electronic equipment mechanical structure 482.6mm (19in) series of mechanical structure size - Part 2. Machine

Cabinet and rack structures from

3 Terms and Definitions

Terms and definitions GB/T 8582-2008 defined apply to this document.

4 General

4.1

Cabinet is the performance of one form of electrical and electronic equipment mechanical properties of the structure of the product, its modular design requirements from mechanical electrical and electronic equipment

Standards structure, and modular design electrical and electronic equipment from the mechanical structure of the GB/T 19290.1-2003, GB/T 19290.2-

2003, GB/T 19290.3-2008, GB/T 19520.1-2007, GB/T 19520.2-2007 and GB/T 3047.1-1995. This standard

It is the basis of these criteria requires integrated modular design for further description of the properties of this product Cabinet objects.

Note. The so-called cabinet product attributes, namely the cabinet as a commodity available to the user by the manufacturer.

4.2

provisions cabinet modular design, according to a modular system that is designed to provide relevant engineering applications (such as plug-in box, plug-ins,

PCB, electrical components, electronic components, instruments, equipment, rooms, buildings, etc.) mechanical interface, installation size compatibility and interchangeability.

Note. The modular design and modular design are synonymous.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 28564-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 28564-2012

$165.00