GB/T 27655-2011Method of evaluating wood preservatives by field tests with stakes (English PDF)
木材防腐剂性能评估的野外埋地试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 27655-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2011
Implementation date
April 1, 2012
Scope
GB/T 27655-2011 is the English-translated version of 木材防腐剂性能评估的野外埋地试验方法.
GB/T 27655-2011 is the Chinese standard "Method of evaluating wood preservatives by field tests with stakes". Its scope clause reads: This standard specifies the determination of wood preservative-treated wood samples according to good index when conditions in the field buried by bacteria after wood against insects The method can product durability.
This standard applies to the assessment of outdoor wood products treated with wood preservatives soil contact is anti-corruption and anti-termites performance. Its clauses include terms and definitions; test material, anti-corrosion treatment and test site.
Found what you need?
Document preview — GB/T 27655-2011
National Standard of the People's Republic of China
- ICS
- 79.010
- Classification
- B 71
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 test material, anti-corrosion treatment and test site
1 Scope
This standard specifies the determination of wood preservative-treated wood samples according to good index when conditions in the field buried by bacteria after wood against insects
The method can product durability.
This standard applies to the assessment of outdoor wood products treated with wood preservatives soil contact is anti-corruption and anti-termites performance.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard. However, according to research encourages the parties to the agreement
Study whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 13942.2-2009 natural durability of wood Field Test methods - Part 2. Test methods for natural durability Field
GB/T 14019 wood preservative term
GB/T 27654 Wood preservatives
3 Terms and Definitions
Terms and definitions GB/T 14019 apply to this standard established.
4 test material, anti-corrosion treatment and test site
4.1 test material
Alternatively pine, slash pine sapwood, test material size A. 25mm × 50mm × 500mm (length portrait orientation),
B. 20mm × 20mm × 450mm (length of the longitudinal direction) and C. 4mm (tangential) × 38mm (radial) × 250mm (longitudinal)
3 types. Test material should be healthy and free from defects, moderate growth rings of the same species tested material width, the deviation should not exceed 20%, density is roughly similar. The
Test timber species should be the correct Chinese name and Latin name, place of origin and a brief description of site conditions.
4.2 embalmed
Need to select a standard preservative such as ammonia (amine) soluble copper quaternary (ACQ) a formulation or copper, chromium and arsenic (CCA) for comparison tests, comparison
Preservatives technical indicators should be consistent with GB/T 27654 requirements. Compare preservatives and preservative tested each choose three to five concentrations,
Easy to get three to five drug loading should be based on the concentration of the test target drug load, depending on the spacing between adjacent multiples of two drug load was approximately 1.4, each
Root test material drug load deviation should not exceed 10% of the average drug loading. Each drug loading process at least 10 test materials. According to test materials for anti
Permeability preservatives determined embalmed method size A test material can be treated with preservatives vacuum pressure method of treating, size B
And test material embalmed C may employ a vacuum or without pressure processing method. Test material before preservative treatment should be individually numbered, dried, and
After renaming the embalmed, test material surface without liquid, it should be immediately weighed for calculating drug loading. For copper preservatives, anti-corrosion treatment Weighing
After, you should choose a suitable drying method such as natural drying, preservatives ensure adequate fixation. Before the test material placement, the moisture content should be below 18%.
There should be at least 10 test materials untreated as controls.
4.3 Prepare test site
Select a representative from the venue of tropical, subtropical and warm temperate climate zone. The test area shall indicate the location and climate zone.
To test site is flat, moderate soil moisture, without drought or waterlogging, soil layers thick, rich in humus.
Remote test site should be selected where appropriate pens, to avoid interference with the destruction of human and animal activity, to ensure long-term test.
GB/T 28995-2012 | LY/T 1635-2005 | LY/T 1636-2005 | GB/T 27654-2023 | GB/T 27651-2023 | GB/T 27652-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 27655-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 27655-2011
$85.00