GB/T 44290-2024Calculation method of biogenic carbon content in wood and wood-based products (English PDF)
木材与木制品生物碳含量计算方法
Open the GB/T 44290-2024 preview as PDF
This is a limited preview
Buy now to download the full PDF (15 pages)
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2024
Implementation date
April 1, 2025
Scope
GB/T 44290-2024 is the English-translated version of 木材与木制品生物碳含量计算方法.
GB/T 44290-2024 is the Chinese national standard covering the carbon locked in timber and in wood products — the carbon fraction of the wood and of the product, the moisture content and the oven-dry mass it is applied to, the conversion of that carbon into the carbon dioxide it would release if the product were burnt at the end of its life, and the exclusion of carbon that came from adhesives and modifiers rather than from the tree. Appendix A works the calculation through on examples. First edition, under the National Forestry and Grassland Administration. In force from 1 April 2025. Issued on 29 September 2024, it has been in force since 1 April 2025.
Document preview — GB/T 44290-2024
National Standard of the People's Republic of China
- ICS
- 79.010
- Classification
- B 68
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface... III 1 Scope1
- 2 Normative references1
- 3 Terms and Definitions1
- 4 Determination of Carbon Content2
- 4.1 Carbon content of wood2
- 4.2 Carbon content of wood products2
- 5 Determination of the absolute dry quality of wood and wood products2
- 5.1 Determination of moisture content2
- 5.2 Quality determination2
- 5.3 Determination of the absolute dry quality of wood and wood products2
- 6 Calculation of biogenic carbon content and its conversion to biogenic carbon dioxide3
- 6.1 Calculation of biogenic carbon content3
- 6.2 Calculation of biogenic carbon dioxide3
- 7 Report3
- Appendix A (Informative) Calculation Examples4
- References5
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting is required.
Please note that some of the contents of this document may involve patents, and the issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the State Forestry and Grassland Administration.
This document is under the jurisdiction of the National Technical Committee on Timber Standardization (SAC/TC 41).
This document was drafted by: Wood Industry Research Institute of Chinese Academy of Forestry, Shandong Xingang Enterprise Group Co., Ltd., Qiannianzhou New Materials Technology Group Co., Ltd., Zhejiang Shenghua Yunfeng New Materials Co., Ltd., Hanshifu Integrated Home Furnishing Co., Ltd., Zhonglin Times Holdings Co., Ltd.
Ltd., Zhejiang Shiyou Wood Industry Co., Ltd., Jiusheng Flooring Co., Ltd., North American Maple Home Furnishing (Jiangsu) Co., Ltd., National Forestry and Grassland Bureau East China Survey and Planning Institute, Zhongchuang Green Building (Jiangsu) Security Technology Co., Ltd., Forestry Science and Technology Information Research, Chinese Academy of Forestry Institute, Nanjing Forestry University, and State Forestry and Grassland Administration Management Cadre College.
The main drafters of this document are: Yu Huaqiang, Li Xiaoling, Duan Xinfang, An Xin, Wei Ming, Zhang Xunya, Zhao Youke, Yin Yafang, Xiao Shaoliang, Lao Wanli, Zhang Ran, Lu Tonghua, Zhao Jianzhong, Han Zongli, Jiang Shengbo, Dou Qingqing, Wang Yanwei, Min Dexiu, Li Xin, Hong Yifeng, Zhu Anming, Yang Shuming, Mei Changtong, Yang Zhong, Chen Yong, Yu Tianfei.
Calculation method of biogenic carbon content of wood and wood products
1 Scope
This document describes the calculation method for the biogenic carbon content of wood and wood products and its conversion to biogenic carbon dioxide.
This document applies to the calculation of the biogenic carbon content of wood and wood products and its conversion to biogenic carbon dioxide.
Note. The biochar content in wood and wood products does not include the biochar contained in additives such as adhesives and modifiers in wood products.
2 Normative references
GB/T 1927.4
GB/T 1927.5
GB/T 17657-2022
3 Terms and definitions
The terms and definitions defined in LY/T 1788 and the following apply to this document.
3.1 Wood-based products
Products derived wholly or partly from wood or wood units.
Note. It is a product that has been processed by mechanical, chemical, biological and/or thermal treatment. [Source. ISO 38200 2018, 3.3]
3.2 Biochar
Carbon from biomass.
[Source. ISO 14067 2018, 3.1.7.2]
3.3 biogenic CO2; biogenic carbon dioxide
Carbon dioxide obtained after oxidation of biochar.
Example. Carbon dioxide released into the atmosphere from the oxidation of wood and wood products when they are burned for energy at the end of their life.
[Source. ISO 19694-1 2021, 3.4, modified]
3.4 Carbon content carbon fraction of wood or wood-based products
cf The ratio of the mass of biochar contained in wood and wood products to their absolute dry mass.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
GB/T 1927.4 · GB/T 1927.5
Editions of GB/T 44290
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 44290-2024 | Calculation method of biogenic carbon content in wood and wood-based products | current edition | Current |
This page sells the current edition, GB/T 44290-2024. Earlier editions are listed for reference only.
How to Buy GB/T 44290-2024
- 1Add to cart. Click the "Buy GB/T 44290-2024" button on this page. You can add more standards before checkout.
- 2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
- 3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17657-2022 — Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
GB/T 47310-2026 — Determination of total silicon, aluminium, iron, potassium, sodium, calcium, magnesium, manganese, phosphorus, titanium and sulfur in soil - Monochromatic excitation energy dispersive X-ray fluorescence spectrometry
GB/T 47321-2026 — Specification for the warning data exchange of the national emergency early warning dissemination system
Secure payment via Stripe
Payments accepted
GB/T 44290-2024
$170.00