GB/T 26972-2011Vocabulary of concentrating solar thermal power (English PDF)
聚光型太阳能热发电术语
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26972-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 19, 2011
Implementation date
August 1, 2012
Scope
GB/T 26972-2011 is the English-translated version of 聚光型太阳能热发电术语.
GB/T 26972-2011 is the Chinese standard "Vocabulary of concentrating solar thermal power". Its scope clause reads: This standard specifies the terms and definitions concentrating solar thermal power generation.
This standard applies to concentrating solar thermal power generation in the condenser, photothermal conversion, thermal storage, power generation and grid and other processes. Its clauses include general terms.
Found what you need?
Document preview — GB/T 26972-2011
National Standard of the People's Republic of China
- ICS
- 27.160
- Classification
- F 12
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 3 4 materials and components
- 4 means
- 5 System
- 6 power grid
- References
1 Scope
This standard specifies the terms and definitions concentrating solar thermal power generation.
This standard applies to concentrating solar thermal power generation in the condenser, photothermal conversion, thermal storage, power generation and grid and other processes.
2 general terms
2.1 Concentrator tracking accuracy (or tracking error) trackingaccuracy (orerror)
Condenser with respect to the center of rotation of sunlight converged by the condenser to the target surface of the patterned geometric center of the target surface of the target point
The connection between the opening angle, with its multiple measurements of root mean square value (RMS) expressed in units of mrad.
2.2 Concentrator tracking accuracy (or precision tracking, tracking error)
Condenser center of rotation relative to the inner solar concentrator through converging pattern formed on the target surface and the geometric center of the test period Figure
The average case the geometric center of the opening angle connection, multiple measurements of its rms value (RMS) expressed in units of mrad.
2.3 Condenser aperture area
Condenser intercepts the maximum projected area of the solar radiation.
2.4 Converging field lighting area concentratorfieldaperturearea
The sum of all areas of lighting condenser condenser field.
2.5 Condenser surface profile error
The actual surface profile of the condenser and the theoretical surface profile errors caused by inconsistent, including the position error and the tilt error, in which the incident point
Set the desired position is inconsistent with the position error, and the theoretical value of the slope surface of the incident point is inconsistent with the tilt error.
2.6 Field efficiency condensing
Unit of time via the collective field reflected or transmitted light into the heat sink and the mouth of the solar radiation incident on the condenser to the total field area lighting normal
The ratio of direct solar radiation.
2.7 Converging field of efficiency
Year, by concentrating the field reflected or transmitted light into the heat sink and the mouth of the solar radiation incident on the condenser to the total field area lighting normal
The ratio of direct solar radiation.
2.8 Specular reflectance
Specular reflection of solar radiation flux ratio of solar radiation flux incident.
2.9 Cosine loss
Since the received energy of sunlight incident direction and the normal direction of the mirror are not parallel port lighting caused reduction.
GB/T 33589-2026 | GB/T 29319-2024 | GB/T 33599-2017 | GB/T 26971-2011 | GB/T 26970-2011 | GB 26969-2011 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 26972-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 26972-2011
$375.00