GB/T 26708-2011Laser holographic anti-counterfeiting biaxially oriented polypropylene film (English PDF)

1 Scope

This standard specifies the BOPP laser holographic security film (pseudomembranous) product classification, technical requirements, test methods, inspection rules

And signs, packaging, transportation and storage.

This standard applies to the polypropylene resin as the main raw material, flat membrane via two-way stretch technology obtained type sealing biaxially oriented polypropylene

Propylene film as the base film, a film made directly from the laser holographic anti-counterfeiting pattern on the surface.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 191-2008 Packaging - Pictorial signs

Test conditions for films and sheets. plastic 1040.3-2006 Determination of tensile properties GB/T Part 3

Determination of GB/T 2410-2008 transparent plastic light transmittance and haze

GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan

GB/T 2918-1998 plastic sample conditioning and testing of the standard environment

GB/T 6672-2001 Plastics film and sheeting - Determination of thickness by mechanical scanning

Determination of GB/T 6673-2001 plastic film and sheet length and width

GB/T 8807-1988 Test method for specular gloss plastic

GB/T 10006-1988 coefficient of friction of plastic film and sheeting - Determination

GB/T 12027-2004 plastic film and sheet heating dimensional change test method

GB/T 17000-2009 holographic security products general technical conditions

QB/T 2358-1998 plastic film packaging bag heat sealing strength test method

3 Product Categories

4 Requirements