GB/T 26610.3-2014Guideline for implementation of risk-based inspection of pressure equipment system - Part 3: Qualitative approach to risk (English PDF)
承压设备系统基于风险的检验实施导则 第3部分：风险的定性分析方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26610.3-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 6, 2014
Implementation date
December 1, 2014
Scope
GB/T 26610.3-2014 is the English-translated version of 承压设备系统基于风险的检验实施导则 第3部分：风险的定性分析方法.
GB/T 26610.3-2014 is the Chinese standard "Guideline for implementation of risk-based inspection of pressure equipment system - Part 3: Qualitative approach to risk".
Its scope clause reads: GB/T 26610 in this section gives a qualitative approach to risk analysis for petrochemical plant pressure equipment systems, other workers Qualitative Risk Analysis industry pressure equipment may also refer to implementation of the system adopted.
This section applies to GB/T 26610.1 pressure equipment referred to in the system. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 26610.3-2014
National Standard of the People's Republic of China
- ICS
- 23.020.30
- Classification
- J 74
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Equipment factor
- 3.2 Damage factor
- 3.3 Inspection factor
- 3.4 Maintenance status factor
- 3.5 Process factor
1 Scope
GB/T 26610 in this section gives a qualitative approach to risk analysis for petrochemical plant pressure equipment systems, other workers
Qualitative Risk Analysis industry pressure equipment may also refer to implementation of the system adopted.
This section applies to GB/T 26610.1 pressure equipment referred to in the system.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 26610.1 pressure equipment inspection system based on the implementation of the pilot risk - Part 1. General requirements and implementation procedures
3 Terms and Definitions
GB/T 26610.1 defined and the following terms and definitions apply to this document.
3.1 Equipment factor
EF And means (unit or section) in the characterization of the total number of values related to equipment failure may occur.
3.2 Damage factor
DF Potential damage mechanism characterization of the type of quantization means (unit or section) in.
3.3 Inspection factor
IF Effectiveness and identification device (unit or section) of the potential damage to the mechanism's ability to quantify the characterization of the current testing procedures.
3.4 Maintenance status factor
MCF Characterization of quantization is running the evaluation unit (unit or section) design and manufacturing standards, enterprise management and maintenance program effectiveness.
3.5 Process factor
PF Means (unit or section) Continuity of Operations, process stability and reliability of safety devices quantitative characterization.
GB/T 24159-2022 | GB/T 24160-2022 | GB/T 24162-2022 | GB/T 26610.5-2022 | GB/T 26610.4-2022 | GB/T 26610.2-2022 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 33578.4-2026Rules for risk-based inspection of complete units — Part 4: Parabolic trough solar thermal power plants
- GB/T 26610.2-2022Guideline for implementation of risk-based inspection of pressure equipment system—Part 2:Risk-based inspection plan
- GB/T 33578.1-2017Guideline of risk based inspection of complete units—Part 1: Ethylene units
- GB/T 33578.2-2017Guideline of risk based inspection of complete units—Part 2: Catalytic cracking units
Similar standards
How to Download GB/T 26610.3-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26610.1-2022 — Guideline for implementation of risk-based inspection of pressure equipment system—Part 1: Basic requirements and implementation procedure
GB/T 26610.2-2022 — Guideline for implementation of risk-based inspection of pressure equipment system—Part 2:Risk-based inspection plan
GB/T 26610.4-2022 — Guideline for implementation of risk-based inspection of pressure equipment system—Part 4: Quantitative analysis approach of failure likelihood
Secure payment via Stripe
Payments accepted
GB/T 26610.3-2014
$205.00