GB/T 26483-2011Noise limits of mechanical presses (English PDF)
机械压力机 噪声限值
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26483-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 12, 2011
Implementation date
January 1, 2012
Scope
GB/T 26483-2011 is the English-translated version of 机械压力机 噪声限值.
GB/T 26483-2011 is the Chinese standard "Noise limits of mechanical presses". Its scope clause reads: This standard specifies the mechanical press sound power level and sound pressure level of the noise limits.
This standard applies to mechanical presses, including various types of open press, closed presses and screw presses. Its clauses include noise limits; measurement.
Found what you need?
Document preview — GB/T 26483-2011
National Standard of the People's Republic of China
- ICS
- 25.120.10
- Classification
- J 62
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 noise limits
- 3.1 Noise limit open press
- 3.1.1 open press the sound power level limits
- 3.1.2 open press the noise level limits
1 Scope
This standard specifies the mechanical press sound power level and sound pressure level of the noise limits.
This standard applies to mechanical presses, including various types of open press, closed presses and screw presses.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 23281 Forging Machinery noise level measurement method
GB/T 23282 forging machinery noise power level measurement
3 noise limits
3.1 Noise limit open press
3.1.1 open press the sound power level limits
Noise A-weighted sound power level LWA limit open press continuous idling time should not exceed specified in Table 1.
Table 1
Nominal power/kN limit sound power level LWA/dB (A)
<=160 80
> 160 ~ 25 090
> 250 to 63095
> 630 100
3.1.2 open press the noise level limits
Open press in continuous idling noise A-weighted sound pressure levels prescribed position limits LpA shall not exceed the provisions of Table 2.
Table 2
Nominal power/kN SPL limit LpA/dB (A)
<=160 70
> 160 ~ 25 080
> 250 to 63085
> 63088
3.1.3 open press impulse noise limits SPL
When open press load in a single stroke impulse noise A-weighted sound pressure levels prescribed position shall not exceed the limits specified in Table LpAI 3.
table 3
Nominal power/kN pulse SPL limit LpAI/dB (A)
<=250 93
> 250 to 63095
> 63099
3.2 Noise limits Closed Press
3.2.1 Closed Press the sound power level limits
Noise A-weighted sound power level LWA limits Closed Press continuous idling time should not exceed specified in Table 4.
Table 4
Nominal power/kN limit sound power level LWA/dB (A)
<=2500 110
> 2500 ~ 6300115
> 6300120
3.2.2 The noise level limits Closed Press
Closed Press continuous idling noise A-weighted sound pressure levels prescribed position limits LpA shall not exceed the provisions of Table 5.
table 5
Nominal power/kN SPL limit LpA/dB (A)
<=2500 85
> 2500 - 630 086
> 630 087
3.3 Noise limit screw press
3.3.1 screw press sound power level limits
Screw press at a predetermined operating condition of noise A-weighted sound power level LWA shall not exceed the limits specified in Table 6.
Table 6
Nominal power/kN limit sound power level LWA/dB (A)
<=1000 92
> 1000 to 160 094
Table 6 (Continued)
Nominal power/kN limit sound power level LWA/dB (A)
> 1600 - 315 098
> 3150 ~ 6300101
> 6300110
3.3.2 screw press noise level limits
Screw press when the conditions required to operate at a predetermined position of the A-weighted noise pressure level LpA shall not exceed the limits specified in Table 7.
Table 7
Nominal power/kN SPL limit LpA/dB (A)
<=1000 76
> 1000 to 160 080
> 1600 - 315 082
> 3150 ~ 630 085
> 630 090
4 Measurement
4.1 noise level measurement method
Noise level measurement method mechanical presses shall comply with GB/T 23281 of.
4.2 sound power level measurement
Sound power level measurement of mechanical presses shall comply with GB/T 23282 of.
Measurement conditions 4.3 screw press Noise
Screw press operation when used as prescribed norms, the noise should be measured from the lowest position during the upward movement of the slider.
4.4 Noise Measurement Description
4.4.1
factory test only measures the noise level.
4.4.2
The new design or improve the design, technology, materials, new products after the noise level should be measured during the performance test; can then measure the noise
Sound power level to the noise level of conformity assessment basis.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/Z 41159-2022Production machine for rubber bottle stopper
- GB/T 35084-2018Guidelines for environmental protection at press shop
- GB/T 36230-2018CNC Straight-side link-drive press—Performance requirements and test methods
- JB/T 12999-2017Integral frame straight-sided single-point and double-point presses - Technical requirements
- SN/T 3701.19-2017Technical requirements for the inspection of used electrical and machanical products to import - Part 19: Pressing machines for metal processing
Similar standards
How to Download GB/T 26483-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 26483-2011
$90.00