GB/T 25642-2010Road construction and road maintenance machinery and equipment - Asphalt-aggregate mixture transfer (English PDF)

Foreword

Appendix A of this standard is an informative annex. The standard proposed by China Machinery Industry Federation.

1 Scope

This standard specifies the road construction and maintenance machinery and equipment of asphalt mixture transfer machine (hereinafter referred to as transfer machines) terms and definitions, points Class, requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to self-propelled asphalt mixture transfer machine.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780:1997, MOD)

GB/T 3766 Hydraulic System General technical conditions (GB/T 3766-2001, eqv ISO 4413:1998)

GB 3847 from compression-ignition engines and compression-ignition engine vehicle exhaust smoke emission limits and measurement methods

GB 4094 Flag (GB 4094-1999, eqvECE93/91EEC78/316) automotive controls, indicators and telltales

GB/T 4798.5 application of electric and electronic products environmental conditions - Part 5: Ground vehicle (GB/T 4798.5-2007, IEC 60721-3-5:1997, MOD)

GB 5226.1 Safety of machinery electrical equipment Part 1: General requirements (GB 5226.1-2002, IEC 60204-1:2000, IDT)

GB 5959.1 electric safety devices - Part 1: General requirements (GB 5959.1-2005, IEC 60519-1:2003, IDT)

GB 7258 Safety requirements for operation of motor vehicles

GB/T 7932 pneumatic systems General technical conditions (GB/T 7932-2003, ISO 4414:1998, IDT)

GB/T 7935 General technical conditions for hydraulic components

GB/T 8592 wheeled vehicle steering moving machinery - Determination of dimensions (GB/T 8592-2001, eqv ISO 7457:1997)

GB/T 9969 General Instructions industrial products

GB/T 10596.2-1989 buried scraper conveyor technical conditions (neqISO 1977-1. 1976)

GB/T 10913 speed measurement with moving machinery (GB/T 10913-2005, ISO 6014. 1986, MOD)

GB/T 13306 signs

GB 16710.1 Construction Machinery noise limits

GB/T 16710.2 machinery - Determination of exterior noise - Stationary test conditions

GB/T 16710.3 machinery - Determination of noise measured at the driver position - Stationary test conditions

GB/T 16710.4 Engineering machinery - Determination of exterior noise - Dynamic test conditions (GB/T 16710.4-1996, eqv ISO 6395. 1988)

GB/T 16710.5 machinery - Determination of noise measured at the driver position - Dynamic test conditions (GB/T 16710.5-1996, eqv ISO 6396:1996)

GB/T 17299 moving machinery - minimum entry size (GB/T 17299-1998, idt ISO 2860:1992)

GB/T 17300 moving machinery passage means (GB/T 17300-1998, idt ISO 2867:1994)

GB/T 18577.1 moving machinery defined dimensions and codes - Part 1: Host (GB/T 18577.1-2008, ISO 6746- […]