GB/T 25309-2010High-voltage direct current transfer switches (English PDF)
高压直流转换开关
This is a limited preview
Buy now to download the full PDF (25 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25309-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 10, 2010
Implementation date
May 1, 2011
Scope
GB/T 25309-2010 is the English-translated version of 高压直流转换开关.
GB/T 25309-2010 is the Chinese standard "High-voltage direct current transfer switches". Its scope clause reads: This standard specifies the terms and definitions, service environment conditions, rated values, technical requirements, type test, routine test, special test, field test, etc. of high-voltage direct current transfer switches.
This standard is applicable to DC transfer switches for DC transmission at a voltage level of ±800 kV and below, including metallic return transfer breaker (MRTB), earth return transfer breaker (ERTB), neutral bus switch (NBS) and neutral bus grounding switch (NBGS).
This standard is also applicable to the operating mechanism and auxiliary equipment of these transfer switches. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 25309-2010
National Standard of the People's Republic of China
- ICS
- 29.130.10
- Classification
- K 43
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword i
- Introduction ii
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Normal and special service conditions
- 5 Rated values
- 6 Technical requirements
- 7 Tests
- 8 Rules for transportation, storage, installation, operation and maintenance
- 9 Safety
- Annex A (Informative) Overload current of DC system
- Annex B (Informative) Guide for selection of DC transfer switches
- Annex C (Informative) Test requirements for sub-equipment of DC transfer switches
1 Scope
This standard specifies the terms and definitions, service environment conditions, rated values, technical requirements, type test, routine test, special test, field test, etc. of high-voltage direct current transfer switches.
This standard is applicable to DC transfer switches for DC transmission at a voltage level of ±800 kV and below, including metallic return transfer breaker (MRTB), earth return transfer breaker (ERTB), neutral bus switch (NBS) and neutral bus grounding switch (NBGS).
This standard is also applicable to the operating mechanism and auxiliary equipment of these transfer switches.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 1094.1-1996 Power transformers - Part 1: General (IEC 60076-1:1993, EQV)
GB 1984-2003 High-voltage alternating-current circuit-breakers (IEC 62271-100:2001, MOD)
GB/T 2900.20-1994 Electrotechnical terminology - High-voltage switchgear (IEC 60050 (441), IEC 60056, etc., NEQ)
GB/T 5273-1985 Terminals for transformers, high-voltage apparatus and bushings (IEC 60518:1975, NEQ)
GB/T 7354-2003 Partial discharge measurements (IEC 60270:2000, IDT)
GB 10229-1988 Reactors (IEC 60289:1987, EQV)
GB/T 11022-1999 Common specifications for high-voltage switchgear and controlgear standards (IEC 60694:1996, MOD)
GB/T 11024.1-2001 Shunt capacitors for a.c. power systems having a rated voltage above 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 60871-1:1997, EQV)
GB 11032-2000 Metal oxide surge arresters without gaps for a. c. systems (IEC 60099-4:1991, EQV)
GB/T 12022-2006 Sulphur hexafluoride for industrial use (IEC 376:1971, IEC 376A: 1973, IEC 376B:1974, MOD)
GB/T 13498-2007 Terminology for high-voltage direct current (HVDC) transmission (IEC 60633:1998, IDT)
GB/T 13540 Seismic qualification for high-voltage switchgear and controlgear (GB/T 13540-2009, IEC 62271-2:2003, MOD)
GB/T 16927.1-1997 High-voltage test techniques - Part 1: General test requirements (IEC 60060-1:1989, EQV)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 2900.20, GB 1984 and GB/T 13498, as well as the following, apply.
3.1 DC transfer switches
3.1.1 DC transfer switch
switchgear for transferring DC operating current in HVDC transmission system from one operating return to another
3.1.2 active DC transfer switch
DC transfer switch with charging device
3.1.3 passive DC transfer switch
DC transfer switch without charging device
3.1.4 metallic return transfer breaker (MRTB)
switchgear for transferring DC current from the earth return path to the metallic return path, as shown in Figure 1
[GB/T 13498-2007, definition 9.12] […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 25309-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 25309-2010
$435.00